TPS-A
Built-in Amplifier Torque Transducer

  • CE

TPS-A

Summary

The TPS-A is a compact & lightweight torque transducer with buit-in amplifier. Easy maitenance due to noncontact transmission.
Rated Capacity: ±0.1 N・m to ±5 kN・m
Rated Output: ± (5+0.2) V at load resistance 5 kΩ or more, 2 kΩ or more for ±0.11 N・m to ±2 N・m
Max. Rotation Speed: 15000 rpm for ± 0.1 N・m to ±2 N・m, 5000 rpm for ±5 N・m to ±500 N・m, 4000 rpm for ±1 kN・m, and 3000 rpm for ±5 kN・m

Features

• Built-in amplifier, ±5 V output.
• Rotation speed output: 4 pulses per rotation
• Applicable to a friction-joint coupling (Excluding TPS-A-5KNM)
• Compact and lightweight, good for in line layout (30 mm in width, TPS-A-1NM, 2NM)

Products table

All display

TPS-A-01NM
±0.1 N・m

TPS-A
  • CE

Specifications

Performance
Rated Capacity ±0.1 N·m
Rated Output 5 V ±4% (Load resistance 2 kΩ or more)
Nonlinearity Within ±0.1% RO
Hysteresis Within ±0.1% RO
Environmental Characteristics
Safe Temperature -10 to 70 ºC (Non-condensing)
Compensated Temperature -10 to 60 ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 1.5 kHz (-3 ±1 dB)
SN Ratio 50 dB or more
Power Supply 12±0.5 VDC
Current Consumption 0.4 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 200% (Output is saturated at approx. 110% the rated capacity)
Max. Speed 15000 rpm
Rotational Output 4 pulses per revolution (Open collector without rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 1.0 N・m (Sensor only)
Safe Load at Shaft End 300 N
Moment of Inertia 1.5×10-6kg・m2
Weight Approx. 150 g
EMC Directive EN61326-1 (Class A)
RoHS Directive EN50581
Optional Accessories Couplings: SFC-025SA2-T011-K-8B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Connection cable TE-58R (2 m, terminated with a connector plug)
For 12 VDC power supply and To DC power directly (12 V recommended): Connection cable TE-57R (2 m, bared at the tip)
For 12 VDC power supply and DC power cable (12 V recommended): Connection cable TE-58R (2 m, terminated with a connector plug)

Dimensions

TPS-A

TPS-A-05NM
±0.5 N・m

TPS-A
  • CE

Specifications

Performance
Rated Capacity ±0.5 N·m
Rated Output 5 V ±4% (Load resistance 2 kΩ or more)
Nonlinearity Within ±0.1% RO
Hysteresis Within ±0.1% RO
Environmental Characteristics
Safe Temperature -10 to 70 ºC (Non-condensing)
Compensated Temperature -10 to 60 ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 1.5 kHz (-3 ±1 dB)
SN Ratio 50 dB or more
Power Supply 12±0.5 VDC
Current Consumption 0.4 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 200% (Output is saturated at approx. 110% the rated capacity)
Max. Speed 15000 rpm
Rotational Output 4 pulses per revolution (Open collector without rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 1.0 N・m (Sensor only)
Safe Load at Shaft End 300 N
Moment of Inertia 1.5×10-6kg・m2
Weight Approx. 150 g
EMC Directive EN61326-1 (Class A)
RoHS Directive EN50581
Optional Accessories Couplings: SFC-025SA2-T011-K-8B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Connection cable TE-58R (2 m, terminated with a connector plug)
For 12 VDC power supply and To DC power directly (12 V recommended): Connection cable TE-57R (2 m, bared at the tip)
For 12 VDC power supply and DC power cable (12 V recommended): Connection cable TE-58R (2 m, terminated with a connector plug)

Dimensions

TPS-A

TPS-A-1NM
±1 N・m

TPS-A-1NM
  • CE

Specifications

Performance
Rated Capacity ±1 N·m
Rated Output 5 V ±4% (Load resistance 2 kΩ or more)
Nonlinearity Within ±0.1% RO
Hysteresis Within ±0.1% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 1.5 kHz (-3 ±1 dB)
SN Ratio 50 dB or more
Power Supply 12±0.5 VDC
Current Consumption 0.4 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 200% (Output is saturated at approx. 110% the rated capacity)
Max. Speed 15000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 1.2 N・m (For a single sensor)
Safe Load at Shaft End 300 N
Moment of Inertia 1.5×10-6kg・m2
Weight Approx. 150 g
EMC Directive EN61326-1 (Class A)
RoHS Directive EN50581
Optional Accessories Couplings: SFC-025SA2-T011-K-8B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Connection cable TE-58R (2 m, terminated with a connector plug)
For 12 VDC power supply and To DC power directly (12 V recommended): Connection cable TE-57R (2 m, bared at the tip)
For 12 VDC power supply and DC power cable (12 V recommended): Connection cable TE-58R (2 m, terminated with a connector plug)

Dimensions

TPS-A

TPS-A-2NM
±2 N・m

TPS-A-2NM
  • CE

Specifications

Performance
Rated Capacity ±2 N·m
Rated Output 5 V ±4% (Load resistance 2 kΩ or more)
Nonlinearity Within ±0.1% RO
Hysteresis Within ±0.1% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 1.5 kHz (-3 ±1 dB)
SN Ratio 50 dB or more
Power Supply 12±0.5 VDC
Current Consumption 0.4 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 200% (Output is saturated at approx. 110% the rated capacity)
Max. Speed 15000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 1.2 N・m (For a single sensor)
Safe Load at Shaft End 300 N
Moment of Inertia 1.5×10-6kg・m2
Weight Approx. 150 g
EMC Directive EN61326-1 (Class A)
RoHS Directive EN50581
Optional Accessories Couplings: SFC-025SA2-T011-K-8B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Connection cable TE-58R (2 m, terminated with a connector plug)
For 12 VDC power supply and To DC power directly (12 V recommended): Connection cable TE-57R (2 m, bared at the tip)
For 12 VDC power supply and DC power cable (12 V recommended): Connection cable TE-58R (2 m, terminated with a connector plug)

Dimensions

TPS-A

TPS-A-5NM
±5 N・m

TPS-A-5NM

Specifications

Performance
Rated Capacity ±5 N·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 200 Hz (-3 ±2 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 150%
Max. Speed 5000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 1.5 N·m (Transducer only)
Safe Load at Shaft End 300 N
Moment of Inertia 2.50×10-4kg・m2
Weight Approx. 1.5 kg
Optional Accessories Couplings: SFC-040SA2-K-16B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

TPS-A-10NM
±10 N・m

TPS-A-10NM

Specifications

Performance
Rated Capacity ±10 N·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 200 Hz (-3 ±2 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 150%
Max. Speed 5000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 3 N·m (Transducer only)
Safe Load at Shaft End 300 N
Moment of Inertia 2.60×10-4kg・m2
Weight Approx. 1.8 kg
Optional Accessories Couplings: SFC-060SA2-K-16B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

TPS-A-50NM
±50 N・m

TPS-A-50NM

Specifications

Performance
Rated Capacity ±50 N·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 200 Hz (-3 ±2 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 120%
Max. Speed 5000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 15 N·m (Transducer only)
Safe Load at Shaft End 300 N
Moment of Inertia 2.60×10-4kg・m2
Weight Approx. 1.8 kg
Optional Accessories Couplings: SFC-060SA2-K-16B-ΔB
Note: Δ is the other part of shaft's diameter
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

TPS-A-100NM
±100 N・m

TPS-A-100NM

Specifications

Performance
Rated Capacity ±100 N·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 200 Hz (-3 ±2 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 150%
Max. Speed 5000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 15 N·m (Transducer only)
Safe Load at Shaft End 600 N
Moment of Inertia 2.70×10-4kg・m2
Weight Approx. 1.8 kg
Optional Accessories Couplings: SFF-080SS-K-19B-ΔB∂-100N
Note: Δ is the other part of shaft's diameter, ∂ is the tolerance on the hole. (Blank: h7, K: k6, M: m6, J: j6, S: 35+0.010 to 0)
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

TPS-A-500NM
±500 N・m

Specifications

Performance
Rated Capacity ±500 N·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 500 Hz (-3 ±2 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 150%
Max. Speed 5000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 150 N·m (Transducer only)
Safe Load at Shaft End 800 N
Moment of Inertia 2.30×10-3kg・m2
Weight Approx. 9 kg
Optional Accessories Couplings: SFF-140SS-K-45K-ΔK∂
Note: Δ is the other part of shaft's diameter, ∂ is the tolerance on the hole. (Blank: h7, K: k6, M: m6, J: j6, S: 35+0.010 to 0)
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

TPS-A-1KNM
±1 kN・m

Specifications

Performance
Rated Capacity ±1 kN·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 500 Hz (-3 ±2 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 150%
Max. Speed 4000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 150 N·m (Transducer only)
Safe Load at Shaft End 800 N
Moment of Inertia 2.60×10-3kg・m2
Weight Approx. 10 kg
Optional Accessories Couplings: SFH-190S-T010-K-45K-ΔK∂
Note: Δ is the other part of shaft's diameter, ∂ is the tolerance on the hole. (Blank: h7, K: k6, M: m6, J: j6, S: 35+0.010 to 0)
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

TPS-A-5KNM
±5 kN・m

TPS-A-5KNM

Specifications

Performance
Rated Capacity ±5 kN·m
Rated Output 5 V ±4% (Load resistance 5 kΩ or more)
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature -10 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Cutoff Frequencies of AMP 550 Hz (-3 ±1 dB)
SN Ratio 45 dB or more
Power Supply 10 to 16 VDC
Current Consumption 0.5 A or less (When power supply is 12 VDC)
Mechanical Properties
Safe Overloads 150%
Max. Speed 3000 rpm
Rotational Output 4 pulses per rotation (Open collector, no rotary directions)
Degree of Protection IP40 (IEC 60529)
Safe Bending Moment 500 N·m (Transducer only)
Safe Load at Shaft End 1 kN
Moment of Inertia 1.8×10-2kg・m2
Weight Approx. 30 kg
Optional Accessories Couplings: SFH-260S-T004-4-K-75H-Δ∂
Note: Δ is the other part of shaft's diameter, ∂ is the tolerance on the hole. (Blank: h7, K: k6, M: m6, J: j6, S: 35+0.010 to 0), H: New JIS; N: New regulated motors; None: Old JIS
For AC power supply: AC adapter SA-10A-EDS (For U.S.A.: UNI318-1215-EDS), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)
For 12 VDC power supply: DC power cable P-76 (12 V recommended), Output cable U-15 (1.5 m, P-12-7 to BNC), Output cable U-58 (1.5 m, BNC to 2 alligator clips), Output cable U-59 (1.5 m, BNC to BNC)

Dimensions

TPS-A

Page Top

Download

Recommended products for combination