Other Accessories
Products table
All display
ADP-40P
Power Adapter
| Object Product Model | MRS-104A-S |
|---|
ADT-EX-STPN
RJ-45 relay adapter
| Object Product Model | CTRS-100 Series |
|---|
B-10B
Cable Connectors with Waterproof Cap
| Attached Cabtyre Cable（Chloroprene Cabtyre) | 4-conductor (0.5 mm2) cable, 1 m long |
|---|
B-15B
Cable Connectors with Waterproof Cap
| Remarks | For rubber-filled cable |
|---|---|
| Attached Cabtyre Cable（Chloroprene Cabtyre) | 4-conductor (0.5 mm2) rubber-filled cable, 1 m long |
BNCP-C25J-A
Conversion Adapter (BNC-miniature)
| Object Product Model | CCA-40A CCA-40A-F |
|---|
BRA.0B.200.PCSG
Connector Cap
| Object Product Model | CTRS-100 series |
|---|
BRA.1B.200.PCSG
Connector Cap
| Object Product Model | CTRS-100 series |
|---|
CANTERM 120
Terminal Resistor
| Object Product Model | NTB-100/200 series NTB-500C |
|---|
CCA-1B
Conversion Adapter
| Object Product Model | CCA-40A CCA-40A-F |
|---|
CCA-2B
Conversion Adapter
| Object Product Model | CCA-40A CCA-40A-F |
|---|
CN-10A
Docking board for 2 boxes of NTB-500A/C
| Object Product Model | NTB-500C |
|---|
CN-11A
Docking board for 4 boxes of NTB-500A/C
| Object Product Model | NTB-500C |
|---|
CN-1A
Connection Board/Clip
| Object Product Model | NTB-100/200 series |
|---|
CN-20
Stack fixture
| Object Product Model | PCD-400A,PCD-430A |
|---|
CTRS-RCU010A
Remote Control Unit
Specifications
Operating Button Switch
| REC | Start recording. Operating method: Press the button once. |
|---|---|
| STOP | Stop recording. Operating method: Press the button once or twice.*1 |
| BAL | Execute a balance operation. Operating method: Press the button twice or hold it down.*1 |
| READ | Read the condition settings from the SD card. Operating method: Hold down the button. |
| OPTION 1, OPTION 2 | Use the control software to assign any function to these buttons for use. Operating method: Press the button once. ・Monitor ・Delete the latest data file ・Over reset ・PAUSE |
| Indicator | Status LED Remaining-battery-power indicator LED Remaining-SD-card-space indicator LED Range-over indicator LED REC LED BAL LED READ LED OPTION 1 LED OPTION 2 LED |
|---|---|
| Other Functions | Built-in buzzer Strap hole |
| Operating Temperature | -10 to 50°C |
| Operating Humidity | 20 to 90% (Non-condensing) |
| Storage Temperature | -20 to 60°C |
| Vibration Resistance | 49.0 m/s2 (5 G), 5 to 200 Hz |
| Shock Resistance | 490 m/s2 (50 G), 11 ms or less, half sine wave |
| Degree of Protection | IP50 (IEC 60529) |
| Power Consumption | Approx. 0.2 W |
| Dimensions | 46 W × 90 H × 20 D mm (Excluding protrusions) |
| Weight | Approx. 120 g |
| Compliance | Directive 2014/30/EU (EMC) Directive 2011/65/EU, (EU) 2015/863 (10 restricted substances) (RoHS) |
| Utility Nuts | Size: M3, 6 places |
| *1 This can be switched by using the control software. * Hold down: To press and hold down a button for at least one second. Press twice: To press a button switch twice within 0.5 seconds. |
Dimensions
DA-DB-05RP-SMA-08
High Gain Dipole Antenna
| Object Product Model | MRS-114A MRS-111A MRS-111B |
|---|
DBS-MOUNT
Bracket for Bridge Box
| Object Product Model | DBS-120B-8T DBS-350B-8T DBS-120B-8CT DBS-350B-8CT |
|---|
DBV4-MOUNT
Bracket for Bridge Box
| Object Product Model | DBV-120A-4T DBV-350A-4T DBV-120A-4ET DBV-350A-4ET |
|---|
DSMC-CP
AC adapter for camera
| Object Product Model | DSMC-100A-2 M1 |
|---|
DSMC-TG-11
Sticker A3 10 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-12
Sticker A3 20 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-13
Sticker A2 20 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-14
Sticker A2 40 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-15
Sticker A2 10/20 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-21
Magnet A3 10 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-22
Magnet A3 20 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-41
Reflective sticker A3 10 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-42
Reflective sticker A3 20 mm
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-51
Heat-resistant sticker up to 600°C A8
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DSMC-TG-52
High-temperature sticker up to 150°C A4
| Object Product Model | DSMC-100A-2 M1，DSMC-10A M1 |
|---|
DRA-1
DIN Rail Mounting Plate
| Object Product Model | NTB-100/200 series NTB-500C |
|---|
DUMMY-400B-N
Dummy Panel
| Object Product Model | CDV-456B CDV-458B CDV-464B |
|---|
EDP-70
DIN Rail Mounting Fixture
| Object Product Model | WGA-120A |
|---|
EDX1P-DUMMY
Dummy Panel for EDX
| Object Product Model | EDX-200A EDX-5000A |
|---|
EDX2000-DUMMY
Dummy Panel
| Object Product Model | EDX-100A EDX-5000A |
|---|
ESYN-1A
Terminator
| Object Product Model | ESYN-30A |
|---|---|
| Remarks | For master unit |
ESYN-2A
Terminator
| Object Product Model | ESYN-30A |
|---|---|
| Remarks | For slave unit |
ESYN-30A
Synchronous Extension Unit
| Remarks | When using ESYN-30A, do not use a remote control unit. |
|---|---|
| Display | POWER LED [With EDX-3000B connected] Lit green [With EDX-100A connected] Lit orange |
| Numbers of Connected Recorder | [EDX-3000B synchronous operation] Max. 10 [EDX-100A synchronous operation] Max. 8 [EDX-3000B, EDX-100A mixed synchronous operation* ] Max. 8 *The ID number of EDX-100A must be higher than an ID number of EDX-3000B. |
| Total Synchronous Cable Length** | [EDX-3000B synchronous operation] 1000 m or less [EDX-100A synchronous operation] 50 m or less [EDX-3000B, EDX-100A mixed synchronous operation* ] 50 m or less *The ID number of EDX-100A must be higher than an ID number of EDX-3000B. **Not including the synchronous cable length. |
| Synchronous Cable Length between Devices | [EDX-3000B synchronous operation] 100 m or less [EDX-100A synchronous operation] 50 m or less [EDX-3000B, EDX-100A mixed synchronous operation* ] 50 m or less *The ID number of EDX-100A must be higher than an ID number of EDX-3000B. |
| Dimensions | 92 W × 24.6 H ×55 D mm (Excluding protrusions) |
| Weight | 250 g or less |
| Optional Accessories | EDX connection cable N-106 EDX connection cable N-107 Terminator ESYN-1A (For slave) Terminator ESYN-2A (For master) Extension cable N-108 Extension cable N-109 Extension cable N-110 Extension cable N-111 |
EXT-ANT1
Small Planar Antenna
| Object Product Model | MRS-101A-SE MRS-114A MRS-111A MRS-111A-E MRS-111B |
|---|
EXT-ANT2
Planar Diversity Antenna
| Object Product Model | MRS-114A MRS-111A MRS-111B |
|---|
F-7B
Noise Filter
| Object Product Model | For input of all DPM series models |
|---|
FA-1B
Amplifier Stand
| Object Product Model | DPM-900 series DA-710A CDV-900A CDA-900A VAQ-700A |
|---|
F-BNC
Noise Filter
| Object Product Model | For output of all DPM series models |
|---|
FV-1A
Conversion Adapter
| Object Product Model | CFV-31A PCD-430A CDV-40B CDV-40B-F CFV-40A CVM-41A EDX-15A |
|---|
FV-2A
Conversion Adapter
| Object Product Model | CDV-44AS CDA-44AS CDA-45AS CDV-46AS |
|---|
H-11223
DIN Rail Mounting Fixture
| Object Product Model | WGA-100B |
|---|
HDAB-15P
Integrated Output Connector
| Object Product Model | CDV-464B |
|---|
HDEB-9P
Integrated Output Connector
| Object Product Model | CDV-456B CDV-458B |
|---|
JB-100D
Kyowa Lightning Arrester Kit
| Applicable Outer Diameter of Cable Sheath | Φ 6 to 16 |
|---|---|
| Built-in Arresters | 5 molded units Single arrester unit is also available (HJB-001B). |
| Curing Time | Approx. 1 hour at 23℃ 3 to 5 hours at 0℃ |
| Dimensions | Diameter: Max. 44 mm Length: Max. 210 mm |
JB-200D
Kyowa Cable Connection Kits for 4-conductor Cable
| Applicable Outer Diameter of Cable Sheath | Φ 6 to 16 |
|---|---|
| Curing Time | Approx. 1 hour at 23°C 3 to 5 hours at 0°C |
| Dimensions | Diameter: Max. 32 mm Length: Max. 184 mm |
JB-210D
Kyowa Cable Connection Kits for 8-conductor Cable
| Applicable Outer Diameter of Cable Sheath | Φ 6 to 16 |
|---|---|
| Curing Time | Approx. 1 hour at 23°C 3 to 5 hours at 0°C |
| Dimensions | Diameter: Max. 32 mm Length: Max. 184 mm |
JB-300D
Compact Lightning Protection Connection Kit
| Applicable Outer Diameter of Cable Sheath | Φ 6 to 16 |
|---|---|
| Built-in Arresters | 5 |
| Curing Time | Approx. 1 hour at 23℃ 3 to 5 hours at 0℃ |
| Dimensions | Diameter: Max. 32 mm Length: Max. 180 mm |
JB4LC-US
Junction Box
JT-1A
One-touch Terminal Block
| Object Product Model | UCAM-550A, UCAM-60C M14, UCAM-65C M14 |
|---|
LEAF LIGHT HS V2
USB/CAN Converter
| Object Product Model | NTB-100/200 series NTB-500C |
|---|
MCF-BKT
Independent Left/Right Rack Fixture
| Object Product Model | MCF-8A MCF-16A MCF-8B MCF-16B |
|---|
MCF-DIN
DIN Rack Mounting Bracket for MCF-16A
| Object Product Model | MCF-16A MCF-16B |
|---|
MCF-DUMMY2
Dummy Card for MCF
| Object Product Model | MCF-8A MCF-16A MCF-8B MCF-16B |
|---|
MCF-HANDLE
MCF Handle
| Object Product Model | MCF-8A MCF-16A MCF-8B MCF-16B |
|---|
MCF-JIS
JIS Rack Mounting Bracket for MCF-16A
| Object Product Model | MCF-16A MCF-16B |
|---|
MRS-J11A
MRS Junction Kit
| Object Product Model | MRS-101A-S MRS-101A-SE MRS-101A-V |
|---|
MRS-J11B
MRS Junction Kit
| Object Product Model | MRS-101B-S MRS-101B-V MRS-101B-T |
|---|
MRS-J14A
MRS 4ch Junction Kit
| Object Product Model | MRS-104A-S |
|---|
MRS-P11A
MRS Packaging Kit
| Object Product Model | MRS-101A-SE |
|---|
NTB500-DUMMY
Dummy Panel
| Object Product Model | NTB-500C |
|---|
RB-10A
Battery Pack (10Ah)
| Object Product Model | RMH-301B RMH-310A |
|---|
RB-5A
Battery Pack (5Ah)
| Object Product Model | RMH-301B RMH-310A |
|---|
RCU-41A
Remote Control Unit
| Object Product Model | EDX-100A |
|---|---|
| Control Functions | ①"REC/PAUSE": Starts/pauses data recording. ②"STOP": Stops data recording. ③"BAL": Executes balance adjustment. ④"VOICE MEMO": Records voice memo. |
| Indicators | REC/PAUSE, BAL |
| Cable Length | Approx. 1.5 m (Used by connecting to the CONT IN connector of the EDX-100A recorder unit) |
| Dimensions | 35 W × 110 H × 20 D mm *Excluding protrusions |
| Weight | Approx.200 g |
RCU-42A
Remote Control Unit
| Object Product Model | EDX-200A EDX-5000A |
|---|---|
| Control Functions | REC/PAUSE (Starts/pauses data acquisition) STOP (Stops data acquisition) BAL (Balancing) OPT. (Optional function) VOICE MEMO (Recording with the built-in microphone) |
| Indication | Recording, pausing and balancing are indicated with LED. |
| Buzzer | Equivalent to the EDX recorder unit buzzer |
| Cable Length | Approx. 1.5 m |
| Dimensions | 35 W× 125 H×22 D (mm) *Excluding protrusions |
| Weight | Approx. 220 g |
ST-1A
Stacking connector set
Specifications
| Object Product Model | PCD-400A, PCD-430A |
|---|
UCAM-60A-RP
Recording Paper
| Object Product Model | UCAM-60C |
|---|
UNI318-1215-EDS
AC Adapter
| Object Product Model | NTB-500A NTB-100/200 series EDS-400A ERK-101A MRS-111A TPS-A |
|---|---|
| Remarks | For U.S.A. |
UNI324-2410-CT
AC Adapter for 24 VDC supply
| Object Product Model | WD-100A, WP-120A |
|---|
UNI345-1238-L-US
AC Adapter
| Object Product Model | CTRS-100 series |
|---|---|
| Remarks | For U.S.A. |
UPT-300BR
Isolation Transformer
| Object Product Model | UCAM-550A |
|---|
UT-50A
Terminal Cover
| Object Product Model | USS-51B USV-51B UST-51B |
|---|
WDS-500-COVER
Silicon cover
| Model | WDS-500-COVER-B: Blue WDS-500-COVER-R: Red WDS-500-COVER-Y: Yellow WDS-500-COVER-G: Green WDS-500-COVER-D: Dark Grey WDS-500-COVER-L: Light grey |
|---|---|
| Object Product Model | WDS-500BE |
WDS-500-CASE
Soft Case with Shoulder Strap
| Optional products | WDS-190AS1E WDS-191AS1E WDS-500BE |
|---|
YB-DUMMY
Dummy Panel for 1 Channel
| Object Product Model | YC-3A YC-4A YC-6A YC-8A |
|---|
YC-3A
Portable Housing Case (3 housing units)
| Model | YC-3A YC-3A-AC/DC |
|---|---|
| Object Product Model | DPM-900 series CDV-900A CDA-900A VAQ-700A DA-710A |
| Housing Units | 3 |
| Power Supply | 100 VAC (YC-3A) 100 VAC or 12 VDC (YC-3A-AC/DC) |
| Standard Accessories | AC power cable P-17 (With 2-pin conversion plug CM-52) Instruction manual |
| Optional Accessories | Dummy panel for 1 channel: YB-DUMMY Handle for YC-A: YC-HANDLE |
Dimensions
YC-4A
Portable Housing Case (4 housing units)
| Model | YC-4A YC-4A-AC/DC |
|---|---|
| Object Product Model | DPM-900 series CDV-900A CDA-900A VAQ-700A DA-710A |
| Housing Units | 4 |
| Power Supply | 100 VAC (YC-4A) 100 VAC or 12 VDC (YC-4A-AC/DC) |
| Standard Accessories | AC power cable P-17 (With 2-pin conversion plug CM-52) Instruction manual |
| Optional Accessories | Dummy panel for 1 channel: YB-DUMMY Handle for YC-A: YC-HANDLE |
YC-6A
Portable Housing Case (6 housing units)
| Model | YC-6A YC-6A-AC/DC |
|---|---|
| Object Product Model | DPM-900 series CDV-900A CDA-900A VAQ-700A DA-710A |
| Housing Units | 6 |
| Power Supply | 100 VAC (YC-6A) 100 VAC or 12 VDC (YC-6A-AC/DC) |
| Standard Accessories | AC power cable P-17 (With 2-pin conversion plug CM-52) Instruction manual |
| Optional Accessories | Dummy panel for 1 channel: YB-DUMMY Handle for YC-A: YC-HANDLE |
YC-8A
Portable Housing Case (8 housing units)
| Model | YC-8A YC-8A-AC/DC |
|---|---|
| Object Product Model | DPM-900 series CDV-900A CDA-900A VAQ-700A DA-710A |
| Housing Units | 8 |
| Power Supply | 100 VAC (YC-8A) 100 VAC or 12 VDC (YC-8A-AC/DC) |
| Standard Accessories | AC power cable P-17 (With 2-pin conversion plug CM-52) Instruction manual |
| Optional Accessories | Dummy panel for 1 channel: YB-DUMMY Handle for YC-A: YC-HANDLE |
Dimensions
YC-DIN
DIN Rack Mounting Bracket for YC-8A
| Object Product Model | YC-8A |
|---|
YC-HANDLE
Handle for YC-A
| Object Product Model | YC-3A YC-4A YC-6A YC-8A |
|---|
YC-JIS
JIS Rack Mounting Bracket
| Object Product Model | YC-8A |
|---|