Transducers Accessories

B-10B
Cable Connectors with Waterproof Cap

Attached Cabtyre Cable（Chloroprene Cabtyre)	4-conductor (0.5 mm2) cable, 1 m long

B-15B
Cable Connectors with Waterproof Cap

Remarks	For rubber-filled cable
Attached Cabtyre Cable（Chloroprene Cabtyre)	4-conductor (0.5 mm2) rubber-filled cable, 1 m long

Battery box for AMA

Object Product Model	AMA-A

BCD-E-70SJ
Mounting Fixture

Object Product Model	BCD-E-70S

BD-11A
Wall-mounting Fixtures (for mounting one unit)

Object Product Model	BKK-A

BD-12A
Wall-mounting Fixtures (for mounting two units)

Object Product Model	BKK-A

BD-21A
Protection Covers

Object Product Model	BD-11A

BD-22A
Protection Covers

Object Product Model	BD-12A

BD-31A
Horizontal Surface-Mounting Fixtures (for mounting one unit)

Object Product Model	BKK-A

BD-32A
Horizontal Surface-Mounting Fixtures (for mounting two units)

Object Product Model	BKK-A

BD-41A
Wall Protection Cover

Object Product Model	BD-31A

BD-42A
Wall Protection Cover

Object Product Model	BD-32A

BP01-2T
Base Plate

Object Product Model	LCTB-A-5KN LCTB-A-10KN LCTB-A-20KN

BPF-10B
Cone Filter

Object Product Model	BPB-A BPB-A-T
Mesh Size	10 μm

BPF-10C
Cone Filter

Object Product Model	BPC-A
Mesh Size	10 μm

BPF-2B
Cone Filter

Object Product Model	BPB-A BPB-A-T
Mesh Size	2 μm

BPF-2C
Cone Filter

Object Product Model	BPC-A
Mesh Size	2 μm

BPF-5B
Cone Filter

Object Product Model	BPB-A BPB-A-T
Mesh Size	5 μm

BPF-5C
Cone Filter

Object Product Model	BPC-A
Mesh Size	5 μm

BSD-8B
Dummy Strain Transducer

Remarks	Has the same dimensions as BS-8FT strain transducer. Use this to fix strain transducer mounting legs.
Object Product Model	BS-8FT

BSN-B
Non-stress Transducer Case

Remarks	The special cylindrical case has a strain transducer installed inside. To avoid stress, the case insulates the transducer from mass concrete to let it measure the linear expansion coefficient of the concrete. The measurement result is used to obtain a correction factor for analysis.
Object Product Model	BS-8FT

CA-10B
Saddle

Object Product Model	LC-5,10TV LCK-A-50KN, 100KN LCS-2TD, 5TD LTZ-5TA LCR-B-5 to 50KNS7
Hexagon Socket Head Bolt	M10
Weight (Approx.)	1 kg

CA-1B
Saddle

Object Product Model	LU-50 to 500KE LCS-500K, 1TD
Hexagon Socket Head Bolt	M6
Weight (Approx.)	300 g

CA-1MH
Saddle

Object Product Model	LCV-A-1MN
Hexagon Socket Head Bolt	M12
Weight (Approx.)	4 kg

CA-2B
Saddle

Object Product Model	LCK-A-5 to 20KN LTZ-50K to 2TA LUH-50 to 500KF LUB-B
Hexagon Socket Head Bolt	M6
Weight (Approx.)	200 g

CA-2F
Saddle

Object Product Model	LCN-A LCX-A-ID

CA-50B
Saddle

Object Product Model	LC-20TV LCV-A-500KN LCK-A-200KN LCH-10TF, 20TF LCR-B-100KNS7
Hexagon Socket Head Bolt	M10
Weight (Approx.)	1.8 kg

CAI-2
Inner Plate

Object Product Model	LCN-A

CD
Strain Transducer Spider

Type	Hub：CD-AH Rod：CD-AS
Remarks	This fixture for plane or solid stress measurement lets strain transducers maintain their respective angles.
Object Product Model	BS-8FT

CF-110
Mount Base

Object Product Model	LCH-10TF
Hexagon Socket Head Bolt	4×M8 L=35
Weight (Approx.)	9.8 kg

CF-113F
Mount Base

Object Product Model	LCV-A-500KN
Hexagon Socket Head Bolt	4×M10 L=45
Weight (Approx.)	7 kg

CF-130F
Mount Base

Object Product Model	LCV-A-1MN
Hexagon Socket Head Bolt	4×M12 L=50
Weight (Approx.)	9 kg

CF-42
Mount Base

Object Product Model	LCN-A
Hexagon Socket Head Bolt	4×M5 L=10

CF-50
Mount Base

Object Product Model	LC-5TV LU-50 to 200KE
Hexagon Socket Head Bolt	4×M5 L=20
Weight (Approx.)	1.5 kg

CF-60
Mount Base

Object Product Model	LC-10TV LU-5 to 20KA
Hexagon Socket Head Bolt	4×M6 L=20
Weight (Approx.)	1.8 kg

CF-80
Mount Base

Object Product Model	LC-20TV LCS-500KD to 5TD LU-50 to 500KE LUH-50 to 1TF
Hexagon Socket Head Bolt	4×M8 L=25
Weight (Approx.)	3.9 kg

CFM-100A
Mount Base

Object Product Model	LMA-A-100N LMA-A-200N LMA-A-500N LMA-A-1KN

CFM-10B
Mount Base

Object Product Model	LMB/LMBT-A-10 to 200N

CFM-16B
Mount Base

Object Product Model	LMB/LMBT-A-500 to 2KN

CFM-5A
Mount Base

Object Product Model	LMA-A-5N LMA-A-10N LMA-A-20N LMA-A-50N

CJS-1C
Dedicated Receptacle

Object Product Model	BJ-AT

CL-25D
Strain Transducer Mounting Leg

Remarks	Designed to fix a strain transducer onto the surface of a reinforcing bar, concrete, etc. Use a dummy strain transducer to determine spacing between each leg.
Object Product Model	BS-AT BS-BT

CL-8
Strain Transducer Mounting Leg

Remarks	Designed to fix a strain transducer onto the surface of a reinforcing bar, concrete, etc. Use a dummy strain transducer to determine spacing between each leg.
Object Product Model	BS-8FT

COV01-2T
Stainless Steel Cover

Object Product Model	LCTB-A-5KN LCTB-A-10KN LCTB-A-20KN

COV03-300K
Stainless Steel Cover

Object Product Model	LCTA-A-500N LCTA-A-800N LCTA-A-1KN LCTA-A-2KN LCTA-A-3KN

CR-10
Steady Brace

Object Product Model	LC-10TV

CR-20
Steady Brace

Object Product Model	LC-20TV

CR-5
Steady Brace

Object Product Model	LC-5TV

CSD-25M
Dummy Strain Transducer

Remarks	Has the same dimensions as BS-AT/BS-BT strain transducers. Use this to fix strain transducer mounting legs.
Object Product Model	BS-AT BS-BT

CW-005
Patch

Object Product Model	LUB-5 to 50KB
Weight (Approx.)	18 g

CW-02
Patch

Object Product Model	LUB-100, 200KB
Weight (Approx.)	27 g

CW-1
Patch

Object Product Model	LUB-500KB, 1TB LUB-500KC
Weight (Approx.)	85 g

CW-2
Patch

Object Product Model	LUB-2TB LUB-2TC
Weight (Approx.)	170 g

CWM-12
Patch

Object Product Model	LTZ-200KA to 1TA
Weight (Approx.)	25 g

CWM-18
Patch

Object Product Model	LTZ-2TA
Weight (Approx.)	70 g

CWM-24
Patch

Object Product Model	LTZ-5TA
Weight (Approx.)	200 g

CWM-6
Patch

Object Product Model	LTZ-50, 100KA
Weight (Approx.)	2 g

CX-2
Mount Base

Object Product Model	LUX-B-50N-ID LUX-B-100N-ID LUX-B-200N-ID
Weight (Approx.)	40 g

CX-4
Mount Base

Object Product Model	LUX-B-500N-ID LUX-B-1KN-ID LUX-B-2KN-ID
Weight (Approx.)	100 g

CX-5
Mount Base

Object Product Model	LCX-A-500N-ID LCX-A-1KN-ID LCX-A-2KN-ID
Weight (Approx.)	Approx.100 g

CX-6
Mount Base

Object Product Model	LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID
Weight (Approx.)	350 g

CX-7
Mount Base

Object Product Model	LCX-A-500N-ID LCX-A-1KN-ID LCX-A-2KN-ID
Weight (Approx.)	280 g

DK-1A
Mount Base

Object Product Model	AS-GA AS-GB
Weight	Approx. 2.5 g
Materials	Aluminum

DK-1B
Mount Base

Object Product Model	AS-GA AS-GB
Weight	Approx. 10 g
Materials	Aluminum

DK-1C
Mount Base

Object Product Model	ASW-A
Weight	Approx. 5.3 g
Materials	Aluminum

DK-1D
Mount Base

Object Product Model	ASW-A
Weight	Approx. 13 g
Materials	Aluminum

EB-100
Extension Rods

Object Product Model	DTK DTT DTS DTH DTJ
Dimensions	φ5×100 mm
Transducer Mounting Direction	Downward/Sideways (Downward only for DTH-A-5)

EB-200
Extension Rods

Object Product Model	DTH-A-100 DTT DTS DTJ
Dimensions	φ6×200 mm
Transducer Mounting Direction	Downward/Sideways

EB-300
Extension Rods

Object Product Model	DTT DTS DTJ
Dimensions	φ6×300 mm
Transducer Mounting Direction	Sideways

EB-50
Extension Rods

Object Product Model	DTK DTT DTS DTH DTJ
Dimensions	φ4×50 mm
Transducer Mounting Direction	Downward/Sideways (Downward only for DTH-A-5)

ER-10B
Movable Saddle

Object Product Model	LC-10TV LCH-10TF LUH-10TF
Weight (Approx.)	7.5 kg

ER-20B
Movable Saddle

Object Product Model	LC-20TV LUH-20TF LCH-20TF
Weight (Approx.)	13.1 kg

ER-2B
Movable Saddle

Object Product Model	LUH-50 to 500KF
Weight (Approx.)	1.5 kg

ER-5B
Movable Saddle

Object Product Model	LC-5TV LUH-1 to 5TF LCS-2, 5TD
Weight (Approx.)	4.3 kg

FB-100
Filters for Pore Pressure Transducers (Flat Filter)

Object Product Model	BPB-A BPB-A-T BPC-A
Mesh Size	100 μm

FB-10SUS
Filters for Pore Pressure Transducers (Flat Filter)

Object Product Model	BPB-A BPB-A-T BPC-A
Mesh Size	10 μm

FB-2
Filters for Pore Pressure Transducers (Flat Filter)

Object Product Model	BPB-A BPB-A-T BPC-A
Mesh Size	2 μm

FB-40
Filters for Pore Pressure Transducers (Flat Filter)

Object Product Model	BPB-A BPB-A-T BPC-A
Mesh Size	40 μm

FB-5
Filters for Pore Pressure Transducers (Flat Filter)

Object Product Model	BPB-A BPB-A-T BPC-A
Mesh Size	5 μm

FC-1B
Flexible coupling, Single Type

Object Product Model	TP-D TP-E TP-M
Max. Angular Deviation:	0.8°
Torsion Spring Constant	Approx. 800 N・m/rad
Weight	Approx. 40 g
Others	For use where there is no eccentricity but only declination

Dimensions

FC-2B
Flexible coupling,Double Type

Object Product Model	TP-D TP-E TP-M
Max. Eccentricity	0.5 mm
Max. Angular Deviation:	0.8°
Torsion Spring Constant	Approx. 800 N・m/rad
Weight	Approx. 80 g
Others	For use where there are both eccentricity and declination

Dimensions

FXB-100A
Mounting Band

Object Product Model	DTH-A-100

FXB-30B
Mounting Band

Object Product Model	DTK-A

FXB-50A
Mounting Band

Object Product Model	DTH-A-50

FXB-5A
Mounting Band

Object Product Model	DTH-A-5 to 30

FXBP-100A
Mounting Band

Object Product Model	DTT-A DTS-A

H-1-DT
Hook Type Probe

Product name	Hook Type Probe
Object Product Model	DTK-A, DTH-A, DTJ-A, DT-D

H-20109
G3/8→R3/8

Product name	Screw Standard Conversion Adapters
Materials	C3601 to 5B
G-to-R Screw Standard Conversion	G3/8→R3/8

H-20110
G3/8→R1/2

Product name	Screw Standard Conversion Adaptors
Materials	C3601 to 5B
G-to-R Screw Standard Conversion	G3/8→R1/2

H-5237
G3/8→R1/4

Product name	Screw Standard Conversion Adaptors
Materials	SUS304
G-to-R Screw Standard Conversion	G3/8→R1/4

H-5238
G3/8→R3/8

Product name	Screw Standard Conversion Adaptors
Materials	SUS304
G-to-R Screw Standard Conversion	G3/8→R3/8

H-5239
G3/8→R1/2

Product name	Screw Standard Conversion Adaptors
Materials	SUS304
G-to-R Screw Standard Conversion	G3/8→R1/2

JB-100D
Kyowa Lightning Arrester Kit

Applicable Outer Diameter of Cable Sheath	Φ 6 to 16
Built-in Arresters	5 molded units Single arrester unit is also available (HJB-001B).
Curing Time	Approx. 1 hour at 23℃ 3 to 5 hours at 0℃
Dimensions	Diameter: Max. 44 mm Length: Max. 210 mm

JB-200D
Kyowa Cable Connection Kits for 4-conductor Cable

Applicable Outer Diameter of Cable Sheath	Φ 6 to 16
Curing Time	Approx. 1 hour at 23°C 3 to 5 hours at 0°C
Dimensions	Diameter: Max. 32 mm Length: Max. 184 mm

JB-210D
Kyowa Cable Connection Kits for 8-conductor Cable

Applicable Outer Diameter of Cable Sheath	Φ 6 to 16
Curing Time	Approx. 1 hour at 23°C 3 to 5 hours at 0°C
Dimensions	Diameter: Max. 32 mm Length: Max. 184 mm

JB-300D
Compact Lightning Protection Connection Kit

Applicable Outer Diameter of Cable Sheath	Φ 6 to 16
Built-in Arresters	5
Curing Time	Approx. 1 hour at 23℃ 3 to 5 hours at 0℃
Dimensions	Diameter: Max. 32 mm Length: Max. 180 mm

LD-005
Mount Base with Stopper

Object Product Model	LUB-5 to 50KB
Weight (Approx.)	600 g

LE-005
Spacer

Object Product Model	LUB-5 to 50KB
Weight (Approx.)	74 g

LE-02
Spacer

Object Product Model	LUB-100, 200KB
Weight (Approx.)	77 g

LE-1
Spacer

Object Product Model	LUB-500K, 1TB LUB-500KC
Weight (Approx.)	590 g

LE-2
Spacer

Object Product Model	LUB-2TB LUB-2TC
Weight (Approx.)	1.1 g

MA-10A
Triaxial mount S (For mounting with adhesive)

Object Product Model	ASM-1KCBV

MA-10B
Triaxial mount T(For mounting with screws)

Object Product Model	ASM-1KCBV

MB-B
Magnet Base

Remarks	Widely usable for supporting displacement transducers, etc.

RA01-10T
Rubber Attachment

Object Product Model	LCTE-A-50KN LCTE-A-100KN LCTD-A-100KN

RA01-2T
Rubber Attachment

Object Product Model	LCTE-A-10KN LCTE-A-20KN LCTB-A-5KN LCTB-A-10KN LCTB-A-20KN

RA01-30T
Rubber Attachment

Object Product Model	LCTD-A-200KN LCTD-A-300KN

RA01-5T
Rubber Attachment

Object Product Model	LCTE-A-30KN LCTE-A-50KN LCTE-A-100KN

RA02-100K
Rubber Attachment

Object Product Model	LCTA-A-500N LCTA-A-800N LCTA-A-1KN

RA02-300K
Rubber Attachment

Object Product Model	LCTA-A-2KN LCTA-A-3KN

RJ-02
Rotary Attachment

Object Product Model	LU-50 to 200KE
Weight (Approx.)	1.2 kg

RJ-02B
Rotary Attachment

Object Product Model	LT-50 to 200KFH LT-50 to 200KFL
Weight (Approx.)	1.5 kg

RJ-05
Rotary Attachment

Object Product Model	LU-500KE
Weight (Approx.)	1.7 kg

RJ-05B
Rotary Attachment

Object Product Model	LT-500KFH LT-500KFL
Weight (Approx.)	1.9 kg

RJ-1
Rotary Attachment

Object Product Model	LU-1TE
Weight (Approx.)	2.8 kg

RJ-10
Rotary Attachment

Object Product Model	LU-10TE
Weight (Approx.)	10.4 kg

RJ-1B
Rotary Attachment

Object Product Model	LT-1TFH LT-1TFL
Weight (Approx.)	2.7 kg

RJ-2
Rotary Attachment

Object Product Model	LU-2TE
Weight (Approx.)	2.8 kg

RJ-20
Rotary Attachment

Object Product Model	LU-20TE
Weight (Approx.)	28.3 kg

RJ-2B
Rotary Attachment

Object Product Model	LT-2TFH LT-2TFL
Weight (Approx.)	2.8 kg

RJ-5
Rotary Attachment

Object Product Model	LU-5TE
Weight (Approx.)	5.1 kg

RJ-5B
Rotary Attachment

Object Product Model	LT-5TFH LT-5TFL
Weight (Approx.)	10.9 kg

SH-2-DT
Roller-equipped Probe

Product name	Roller-Equipped Probe
Object Product Model	DTK-A, DTH-A, DTJ-A, DT-D

TBC-T
Brush Carrier

Object Product Model	TP-M

THC-2
Hook

Object Product Model	LU-50 to 200KE
Weight (Approx.)	0.4 kg

THC-5
Hook

Object Product Model	LU-500KE
Weight (Approx.)	0.6 kg

THC-10
Hook

Object Product Model	LU-1TE
Weight (Approx.)	1.8 kg

THD-2
Hook

Object Product Model	LT-50 to 200KFH LT-50 to 200KFL
Weight (Approx.)	0.5 kg

THD-5
Hook

Object Product Model	LT-500KFH LT-500KFL
Weight (Approx.)	0.6 kg

THD-10
Hook

Object Product Model	LT-1TFH LT-1TFL
Weight (Approx.)	1.8 kg

TIP-10A
Mounting Tips

Object Product Model	DTC-A
Remarks	Use the optional mounting tips where a bezel may not be prepared on the test piece or where the mounting bezel distance is too wide. The tip is available in 2 pieces per set.

TRC-10
Shackle

Object Product Model	LU-1TE
Weight (Approx.)	1.5 kg

TRC-2
Shackle

Object Product Model	LU-50 to 200KE
Weight (Approx.)	0.4 kg

TRC-5
Shackle

Object Product Model	LU-500KE
Weight (Approx.)	0.6 kg

TRD-10
Shackle

Object Product Model	LT-1TFH LT-1TFL
Weight (Approx.)	1.5 kg

TRD-2
Shackle

Object Product Model	LT-50 to 200KFH LT-50 to 200KFL
Weight (Approx.)	0.4 kg

TRD-5
Shackle

Object Product Model	LT-500KFH LT-500KFL
Weight (Approx.)	0.6 kg

TS-2
Whirl-stop Bracket

Object Product Model	LUX-B-50N-ID LUX-B-100N-ID LUX-B-200N-ID

TS-4B
Whirl-stop Bracket

Object Product Model	LUX-B-500N-ID LUX-B-1KN-ID LUX-B-2KN-ID

TS-6B
Whirl-stop Bracket

Object Product Model	LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID

TSC-2F
Whirl-stop Coupling

Object Product Model	LUX-B-50N-ID LUX-B-100N-ID LUX-B-200N-ID

TSC-2M
Whirl-stop Coupling

Object Product Model	LUX-B-50N-ID LUX-B-100N-ID LUX-B-200N-ID

TSC-4FB
Whirl-stop Coupling

Object Product Model	LUX-B-500N-ID LUX-B-1KN-ID LUX-B-2KN-ID

TSC-4MB
Whirl-stop Coupling

Object Product Model	LUX-B-500N-ID LUX-B-1KN-ID LUX-B-2KN-ID

TSC-6FB
Whirl-stop Coupling

Object Product Model	LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID

TSC-6MB
Whirl-stop Coupling

Object Product Model	LUX-B-5KN-ID LUX-B-10KN-ID LUX-B-20KN-ID

TU-12
Ball Joint

Object Product Model	LU-500KE LUH-50 to 200KF
Weight (Approx.)	100 g

TU-12B
Ball Joint

Object Product Model	LT-50 to 200KFH LT-50 to 200KFL LUX-B-500N to 2KN-ID
Weight (Approx.)	200 g

TU-12C
Ball Joint

Object Product Model	LTZ-200K to 1TA
Weight (Approx.)	100 g

TU-14
Ball Joint

Object Product Model	LU-1TF LUH-1TF
Weight (Approx.)	200 g

TU-18
Ball Joint

Object Product Model	LU-2TE LUH-500KF, 2TF
Weight (Approx.)	300 g

TU-18B
Ball Joint

Object Product Model	LT-1TFH LT-1TFL LUX-B-5 to 20KN-ID
Weight (Approx.)	300 g

TU-18C
Ball Joint

Object Product Model	LTZ-2TA
Weight (Approx.)	300 g

TU-24C
Ball Joint

Object Product Model	LTZ-5TA
Weight (Approx.)	1 kg

TU-26
Ball Joint

Object Product Model	LU-5TE LUH-5TF
Weight (Approx.)	1 kg

TU-39B
Ball Joint

Object Product Model	LT-5TFH LT-5TFL
Weight (Approx.)	2.2 kg

TU-6B
Ball Joint

Object Product Model	LUX-B-50 to 200N-ID
Weight (Approx.)	25 g

TU-6C
Ball Joint

Object Product Model	LTZ-50, 100KA
Weight (Approx.)	20 g

TU-8
Ball Joint

Object Product Model	LU-50 to 200KE LUR-A-SA1
Weight (Approx.)	100 g

TW-002
Hanger

Object Product Model	LUB-5 to 20KB
Weight (Approx.)	13 g

TW-005
Hanger

Object Product Model	LUB-5 to 50KB
Weight (Approx.)	25 g

TW-02
Hanger

Object Product Model	LUB-100, 200KB
Laterally movable range	3.5
Weight (Approx.)	70 g

TW-1
Hanger

Object Product Model	LUB-500KB, 1TB LUB-500KC
Laterally movable range	3.5
Weight (Approx.)	250 g

TW-2
Hanger

Object Product Model	LUB-2TB LUB-2TC
Laterally movable range	4.5
Weight (Approx.)	500 g

X-1-DT
Ballpoint Probe

Product name	Ballpoint Probe
Object Product Model	Probes for replacement of DTH, DTJ, DT-D, DTK type standard accessory probes

XS-105-DT
Spheric Probe

Product name	Spheric Probe
Object Product Model	DTK-A, DTH-A, DTJ-A, DT-D

XS-2-DT
Flat Probe

Product name	Flat Probe
Object Product Model	DTK-A, DTH-A, DTJ-A, DT-D

XS-5-DT
Flat Probe

Product name	Flat Probe
Object Product Model	DTK-A, DTH-A, DTJ-A, DT-D

XS-6-DT
Spheric Probe

Product name	Spheric Probe
Object Product Model	DTK-A, DTH-A, DTJ-A, DT-D