HSC-BS
Small-sized Hybrid Signal Conditioner
Summary
· As preamplifiers of control signals for production equipment possible.
· Directly be mounted to circuit boards possible
· External resistors enable adjustment of bridge excitation voltage, zero balance and gain.
Features
The HSC-BS is a small-sized hybrid amplifier for connecting strain gages and strain-gage transducers.
Products table
All display
HSC-10BS
DC to 10 Hz ±20% (−3 dB)
Specifications
| Applicable Transducers | 120 to 1000 Ω strain-gage transducers |
|---|---|
| Bridge Excitation | 2.0 to 10.0 VDC (Depends on external resistor.) |
| Balance Adjustment | ±1.5 mV/V, variable (Depends on external resistor.) |
| Output Voltage | 0 to ±10 V (Load resistance 5 kΩ. Depends on external resistor.) Maximum voltage changes depending on supply voltage. |
| Operating Temperature/Humidity | 0 to 50ºC, 95% or less (Non-condensing) |
| Power Supply | ±5 to ±18 VDC |
HSC-20BS
DC to 1 kHz (−3 dB)
Specifications
| Applicable Transducers | 120 to 1000 Ω strain-gage transducers |
|---|---|
| Bridge Excitation | 2.0 to 10.0 VDC (Depends on external resistor.) |
| Balance Adjustment | ±1.5 mV/V, variable (Depends on external resistor.) |
| Output Voltage | 0 to ±10 V (Load resistance 5 kΩ. Depends on external resistor.) Maximum voltage changes depending on supply voltage. |
| Operating Temperature/Humidity | 0 to 50ºC, 95% or less (Non-condensing) |
| Power Supply | ±5 to ±18 VDC |
Remarks
*Peripheral circuit should be prepared by users.