Leakage detection and diagnostic system
Products table
All display
Leakage detection and diagnostic system
Composition
Sensor
| Sensor | External current electrode Internal current electrode Potential electrode |
|---|
Scanner
| Master Scanner LDS-136 | 1set |
|---|---|
| Additional Scanner LDS-160 | 1, 160 measuring points |
Measurement
| Excitation Power Supply | 1set |
|---|---|
| Voltage | 1set |
| Current | 1set |
Control
| PC | 1 formula |
|---|
Specifications
General Specifications
| Operating Humidity | 10 to 40ºC, 45 to 85% RH |
|---|---|
| Supply Power | 100 VAC |
| Thunderbolt Resistance | 10 kV for 10 µs between each electrode connection terminal and ground terminal |
| Countermeasure Against Power Failure | Backup power supply is incorporated to protect the system against power failure during measurement. |
Sensor
| Sensor composition | External current electrode Internal current electrode Potential electrode |
|---|
Scanner（1Unit Specifications）
| Number of Connectable Electrodes | Max. 4000 |
|---|---|
| Switching Time | Approx. 0.1 s |
| Switching Element | FET switch and photo MOS relay |
Measuring Section
| Impression Power Supply | Constant-current (0 to 10 A) (Voltage generated in and outside the site is usually 10 V.) |
|---|---|
| Measurement of Voltage between Electrodes | Measuring range: AUTO |
| Measuring time | Approx. 1 hour (When 320 points are measured with 4 samples, 2 cycles per point) |
| Cutting [ no ] off the electric current Power | Approx. 5 minutes Protect the system against power failure during measurement. |
Control（PC）
| Plug | Desktop type |
|---|---|
| Monitor | Liquid crystal display |
| External Storage | DVD-R, etc. |
General Specifications
| Operating Temperature | 10 to 40ºC |
|---|