HS Series
"Handy Scale" Portable Weighing Systems
Summary
Easy to use
High-stability Measurement
The "Handy Scale" portable truck weighing system has been favorably used by automobile-related customers in Japan and abroad. The system enables easy and stable measurement of individual wheel loads, individual axle loads, subtotals of front/rear and left/right wheel and axle loads and the total, which are indispensable for weighing trucks.
Features
Features of Detector
●Unique aluminum integrated structure for minimal eccentric error
●Wide platform for easy measurement with Low-profile tire
●Rubber frame for easy landing
●Cable integrated to protect connector against damage due to wheel-Removal
●Diaphragm on both sides improves drip and moisture proofness
Features of Indicator
●Contrast-adjustable LCD screen imaging tire positions
●Operates on AC 100V to 240V, no switchover required. Operation on DC 12V possible with optional battery kit
●4-channel HM04E8 provides 3 display modes of "individual wheel load," "axle load" and "%."
8-channel HM08E9 provides 2 display modes of "wheel load" and "axle load" selectable with the cursor key.
●Car No. is input and printed with the built-in printer.
●RS-232C interface
●Functions, such as a "indicated-value stable mark" and a "acceleration-due-to-gravity compensation function", are substantial.
Block diagrams
Products table
All display
HS1001NX4E8
Detector + Indicator, Rated Capacity: 4 t, Maximum Wheel Load: 1000 kg
General Specifications
| Rated Capacity | 4 t |
|---|---|
| Maximum Wheel Load | 1000 kg |
| Minimum Graduation | 1 kg |
| System Accuracy | ±0.2%（* ) (* ) System accuracy is when used at 25±10°C. |
| Optional Accessories | 12VDC battery kit is optional accessory. (Model: BATKIT) |
|---|
Specifications of Detector
Performance
| Rated Capacity | 1000 kg |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.1% RO or less |
| Rated Output | Approx. 1.0 mV/V |
Environmental Characteristics
| Safe Temperature | -20 to 70°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 60°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.01% RO/°C |
| Temperature Effect on Output | Within ±0.01%/°C |
Electrical Characteristics
| Safe Excitation | 20 VDC |
|---|---|
| Recommended Excitation | 1 to 10 VDC |
| Input Resistance | 395 ±5 Ω |
| Output Resistance | 350 ±2 Ω |
| Cable | 4-conductor (0.3 mm2) shielded chloroprene cable, 6 mm diameter by 20 cm long, terminated with a connector plug NJW-207-AdF6 (Shield wire is connected to the case.) |
Mechanical Properties
| Safe Overloads | 120% |
|---|---|
| Weight | Approx.8 kg (Including cable) |
| Degree of Protection | IP63 (IEC 60529) [Note] IP 63 is not permanent. Waterproof performance could be decreased depending on the usage environment. |
Specifications of Indicator
| Number of Channels | 4 |
|---|---|
| Display Contents | Wheel load, axle load, left & right, total weight, ratio%, cross% |
| Number of Display Digits | 5 for each individual load, 6 for total load |
| Display | LCD |
| Operating Temperature | -10 to 40°C |
| Accuracy | Within ±0.03% FS |
| Printer | 5×7, dot impact printer |
| Power Supply | 100 to 240 VAC or 10 to 18 VDC Power consumption 20 VA (Regular) 30 VA (When the printer is operating) External battery kit is available. (Model:BATKIT) Power supply: 12 VDC |
| Weight | Approx. 7 kg |
| Interfaces | RS-232C |
| Standard Accessories | AC power cable (3 m), printer paper, ink ribbon |
|---|
Dimensions
HS1002NAX4E8
Detector + Indicator, Rated Capacity: 8 t, Maximum Wheel Load: 2000 kg
General Specifications
| Rated Capacity | 8 t |
|---|---|
| Maximum Wheel Load | 2000 kg |
| Minimum Graduation | 2 kg |
| System Accuracy | ±0.2%（* ) (* ) System accuracy is when used at 25±10°C. |
| Optional Accessories | 12VDC battery kit is optional accessory. (Model: BATKIT) |
|---|
Specifications of Detector
Performance
| Rated Capacity | 2000 kg |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.1% RO or less |
| Rated Output | Approx. 0.7 mV/V |
Environmental Characteristics
| Safe Temperature | -20 to 70°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 60°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.01% RO/°C |
| Temperature Effect on Output | Within ±0.01%/°C |
Electrical Characteristics
| Safe Excitation | 20 VDC |
|---|---|
| Recommended Excitation | 1 to 10 VDC |
| Input Resistance | 395 ±5 Ω |
| Output Resistance | 350 ±2 Ω |
| Cable | 4-conductor (0.3 mm2) shielded chloroprene cable, 6 mm diameter by 20 cm long, terminated with a connector plug NJW-207-AdF6 (Shield wire is connected to the case.) |
Mechanical Properties
| Safe Overloads | 120% |
|---|---|
| Weight | Approx.11 kg (Including cable) |
| Degree of Protection | IP63 (IEC 60529) [Note] IP 63 is not permanent. Waterproof performance could be decreased depending on the usage environment. |
Specifications of Indicator
| Number of Channels | 4 |
|---|---|
| Display Contents | Wheel load, axle load, left & right, total weight, ratio%, cross% |
| Number of Display Digits | 5 for each individual load, 6 for total load |
| Display | LCD |
| Operating Temperature | -10 to 40°C |
| Accuracy | Within ±0.03% FS |
| Printer | 5×7, dot impact printer |
| Power Supply | 100 to 240 VAC or 10 to 18 VDC Power consumption 20 VA (Regular) 30 VA (When the printer is operating) External battery kit is available. (Model:BATKIT) Power supply: 12 VDC |
| Weight | Approx. 7 kg |
| Interfaces | RS-232C |
| Standard Accessories | AC power cable (3 m), printer paper, ink ribbon |
|---|
Dimensions
HS1003NAX4E8
Detector + Indicator, Rated Capacity: 12 t, Maximum Wheel Load: 3000 kg
General Specifications
| Rated Capacity | 12 t |
|---|---|
| Maximum Wheel Load | 3000 kg |
| Minimum Graduation | 2 kg |
| System Accuracy | ±0.2%（* ) (* ) System accuracy is when used at 25±10°C. |
| Optional Accessories | 12VDC battery kit is optional accessory. (Model: BATKIT) |
|---|
Specifications of Detector
Performance
| Rated Capacity | 3000 kg |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.1% RO or less |
| Rated Output | Approx. 1.0 mV/V |
Environmental Characteristics
| Safe Temperature | -20 to 70°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 60°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.01% RO/°C |
| Temperature Effect on Output | Within ±0.01%/°C |
Electrical Characteristics
| Safe Excitation | 20 VDC |
|---|---|
| Recommended Excitation | 1 to 10 VDC |
| Input Resistance | 395 ±5 Ω |
| Output Resistance | 350 ±2 Ω |
| Cable | 4-conductor (0.3 mm2) shielded chloroprene cable, 6 mm diameter by 20 cm long, terminated with a connector plug NJW-207-AdF6 (Shield wire is connected to the case.) |
Mechanical Properties
| Safe Overloads | 120% |
|---|---|
| Weight | Approx.11 kg (Including cable) |
| Degree of Protection | IP63 (IEC 60529) [Note] IP 63 is not permanent. Waterproof performance could be decreased depending on the usage environment. |
Specifications of Indicator
| Number of Channels | 4 |
|---|---|
| Display Contents | Wheel load, axle load, left & right, total weight, ratio%, cross% |
| Number of Display Digits | 5 for each individual load, 6 for total load |
| Display | LCD |
| Operating Temperature | -10 to 40°C |
| Accuracy | Within ±0.03% FS |
| Printer | 5×7, dot impact printer |
| Power Supply | 100 to 240 VAC or 10 to 18 VDC Power consumption 20 VA (Regular) 30 VA (When the printer is operating) External battery kit is available. (Model:BATKIT) Power supply: 12 VDC |
| Weight | Approx. 7 kg |
| Interfaces | RS-232C |
| Standard Accessories | AC power cable (3 m), printer paper, ink ribbon |
|---|
Dimensions
HS1005NX4E8
Detector + Indicator, Rated Capacity: 20 t, Maximum Wheel Load: 5000 kg
General Specifications
| Rated Capacity | 20 t |
|---|---|
| Maximum Wheel Load | 5000 kg |
| Minimum Graduation | 5 kg |
| System Accuracy | ±0.2%（* ) (* ) System accuracy is when used at 25±10°C. |
| Optional Accessories | 12VDC battery kit is optional accessory. (Model: BATKIT) |
|---|
Specifications of Detector
Performance
| Rated Capacity | 5000 kg |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.1% RO or less |
| Rated Output | Approx. 1.0 mV/V |
Environmental Characteristics
| Safe Temperature | -20 to 70°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 60°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.01% RO/°C |
| Temperature Effect on Output | Within ±0.01%/°C |
Electrical Characteristics
| Safe Excitation | 20 VDC |
|---|---|
| Recommended Excitation | 1 to 10 VDC |
| Input Resistance | 395 ±5 Ω |
| Output Resistance | 350 ±2 Ω |
| Cable | 4-conductor (0.3 mm2) shielded chloroprene cable, 6 mm diameter by 25 cm long, terminated with a connector plug NJW-207-AdF6 (Shield wire is connected to the case.) |
Mechanical Properties
| Safe Overloads | 120% |
|---|---|
| Weight | Approx.20 kg (Including cable) |
| Degree of Protection | IP63 (IEC 60529) [Note] IP 63 is not permanent. Waterproof performance could be decreased depending on the usage environment. |
Specifications of Indicator
| Number of Channels | 4 |
|---|---|
| Display Contents | Wheel load, axle load, left & right, total weight, ratio%, cross% |
| Number of Display Digits | 5 for each individual load, 6 for total load |
| Display | LCD |
| Operating Temperature | -10 to 40°C |
| Accuracy | Within ±0.03% FS |
| Printer | 5×7, dot impact printer |
| Power Supply | 100 to 240 VAC or 10 to 18 VDC Power consumption 20 VA (Regular) 30 VA (When the printer is operating) External battery kit is available. (Model:BATKIT) Power supply: 12 VDC |
| Weight | Approx. 7 kg |
| Interfaces | RS-232C |
| Standard Accessories | AC power cable (3 m), printer paper, ink ribbon |
|---|
Dimensions
HM04E8
Indicator, 4 channels
Specifications of Indicator
| Number of Channels | 4 |
|---|---|
| Display Contents | Wheel load, axle load, left & right, total weight, ratio%, cross% |
| Number of Display Digits | 5 for each individual load, 6 for total load |
| Display | LCD |
| Operating Temperature | -10 to 40ºC |
| Accuracy | Within ±0.03% FS |
| Printer | 5×7, dot impact printer |
| Power Supply | 100 to 240 VAC or 10 to 18 VDC Power consumption 20 VA (Regular) 30 VA (When the printer is operating) External battery kit is available. (Model:BATKIT) Power supply: 12 VDC |
| Weight | Approx. 7 kｇ |
| Interfaces | RS-232C |
| Standard Accessories | AC power cable (3 m), printer paper, ink ribbon |
|---|---|
| Optional Accessories | 12VDC battery kit is optional accessory. (Model: BATKIT) |
Dimensions
HM08E9
Indicator, 6 or 8 channels
Specifications of Indicator
| Number of Channels | 6, 8 switchable |
|---|---|
| Display Contents | Wheel load, axle load, left & right, total weight |
| Number of Display Digits | 5 for each individual load, 6 for total load |
| Display | LCD |
| Operating Temperature | -10 to 40ºC |
| Accuracy | Within ±0.03% FS |
| Printer | 5×7, dot impact printer |
| Power Supply | 100 to 240 VAC or 10 to 18 VDC Power consumption 20 VA (Regular) 30 VA (When the printer is operating) External battery kit is available. (Model:BATKIT) Power supply: 12 VDC |
| Weight | Approx. 7 kｇ |
| Interfaces | RS-232C |
| Standard Accessories | AC power cable (3 m), printer paper, ink ribbon |
|---|---|
| Optional Accessories | 12VDC Battery kit is optional accessory. (Model: BATKIT) |
Dimensions
Remarks
*Be sure to use the remote sensing cables for the indicators.