Piezoelectric Acceleration Transducer (Built-in Amplifier)


The ASPB-A is a piezoelectric acceleration transducer with a built-in amplifier for measuring high range from slight to large acceleration in high sensitivity.
Rated Capacity: ±2200 m/s2
Dimensions: ϕ8.5 x 11.5 x Hex9 mm
Voltage Sensitivity: 1.0 mV/m/s2 ±10%
Power Supply: 15 to 25 VDC, 0.5 to 5.0 mA


• Wide frequency response from low to high
• High mechanical strength
• Environmentally-resistant

Products table

All display

Piezoelectric Acceleration Transducer (Built-in Amplifier)


Rated Capacity ±2200 m/s2
Voltage Sensitivity 1.0 mV/m/s2 ±10%
Resonant Frequency Approx. 45 kHz
Frequency Response (±1 dB) 3 to 12000 Hz
Frequency Response (±3 dB) 1.5 to 16000 Hz
Impact Resistant 10000 m/s2
Operating Temperature -30 to 110°C
Transverse Sensitivity 5% RO or less
Output Impedance 100 Ω or less
Weight Approx. 3 g
Case Material Titanium
Mounting Screw Female screw (M3×0.5, depth 2)
Power Supply 15 to 25 VDC, 0.5 to 5.0 mA
Cable Dedicated cable, length approx. 2 m
Sensor side: C29-104P
Measuring instrument side: Miniature connector
(Shield wire is connected to the case.)
Standard Accessories Miniature BNC conversion connector
Optional Accessories Insulated stad



Page Top

To Ensure Safe Usage

Before measuring data by using the CCA-40A or CCA-40A-F, insulate the mounting surface between the transducer and target object.


*Acceleration (m/s2)
= Output voltage from sensor (mV) ÷ Voltage sensitivity (mV/m/s2)



Recommended products for combination