ASPC-A
Piezoelectric Acceleration Transducer (Built-in Amplifier)
Summary
The ASPC-A is a piezoelectric acceleration transducer with a built-in amplifier for measuring high range from slight to large acceleration in high sensitivity.
Rated Capacity: ±360 to ±4000 m/s2
Dimensions: 14.2 x 14.2 x 23.7 mm
Voltage Sensitivity: 1.0 mV/m/s2 ±10% or 10 mV/m/s2 ±10%
Power Supply: 21 to 24 VDC, 0.5 to 10 mA
Features
• Wide frequency response from low to high
• High mechanical strength
• Environmentally-resistant
Products table
All display
ASPC-A-30-ID
±360m/s2
Specifications
| Rated Capacity | ±360 m/s2 |
|---|---|
| Voltage Sensitivity | 10 mV/m/s2 ±10% |
| Resonant Frequency | Approx. 35 kHz |
| Frequency Response (±1 dB) | 1 to 5000 Hz |
| Frequency Response (±3 dB) | 1 to 8000 Hz |
| Impact Resistant | 30000 m/s2 |
| Operating Temperature | -40 to 85°C (With operating power supply: 0.5 to 5 mA) -40 to 70°C (With operating power supply: 0.5 to 10 mA) Measuring instrument side's operating temperature: -20 to 60°C |
| Transverse Sensitivity | 5% RO or less |
| Output Impedance | 1000 Ω or less |
| Weight | Approx. 11 g (Excluding cable) |
| Case Material | Titanium |
| Mounting Screw | Female screw (M5×0.8, depth 3.5) |
| Power Supply | 21 to 24 VDC, 0.5 to 10 mA |
| Cable | Dedicated cable, length approx. 3.3 m Sensor side: DR-4S-1 Measuring instrument side: BNC connector (BNC163) (Shield wire is connected to the case.) |
| Sensor ID | TEDS (IEEE1451.4) |
| Standard Accessories | Dedicated cable SA12ZSC-01B |
|---|---|
| Optional Accessories | Mount base |
Dimensions
ASPC-A-30
±400m/s2
Specifications
| Rated Capacity | ±400 m/s2 |
|---|---|
| Voltage Sensitivity | 10 mV/m/s2 ±10% |
| Resonant Frequency | Approx. 35 kHz |
| Frequency Response (±1 dB) | 1 to 5000 Hz |
| Frequency Response (±3 dB) | 1 to 8000 Hz |
| Impact Resistant | 30000 m/s2 |
| Operating Temperature | -50 to 110°C (With operating power supply: 0.5 to 5 mA) -50 to 70°C (With operating power supply: 0.5 to 10 mA) Measuring instrument side's operating temperature: -20 to 60°C |
| Transverse Sensitivity | 5% RO or less |
| Output Impedance | 1000 Ω or less |
| Weight | Approx. 11 g (Excluding cable) |
| Case Material | Titanium |
| Mounting Screw | Female screw (M5×0.8, depth 3.5) |
| Power Supply | 21 to 24 VDC, 0.5 to 10 mA |
| Cable | Dedicated cable, length approx. 3.3 m Sensor side: DR-4S-1 Measuring instrument side: BNC connector (BNC163) (Shield wire is connected to the case.) |
| Standard Accessories | Dedicated cable SA12ZSC-01B |
|---|---|
| Optional Accessories | Mount base |
Dimensions
ASPC-A-300-ID
±3600m/s2
Specifications
| Rated Capacity | ±3600 m/s2 |
|---|---|
| Voltage Sensitivity | 1.0 mV/m/s2 ±10% |
| Resonant Frequency | Approx. 35 kHz |
| Frequency Response (±1 dB) | 1 to 5000 Hz |
| Frequency Response (±3 dB) | 1 to 8000 Hz |
| Impact Resistant | 30000 m/s2 |
| Operating Temperature | -40 to 85°C (With operating power supply: 0.5 to 5 mA) -40 to 70°C (With operating power supply: 0.5 to 10 mA) Measuring instrument side's operating temperature: -20 to 60°C |
| Transverse Sensitivity | 5% RO or less |
| Output Impedance | 1000 Ω or less |
| Weight | Approx. 11 g (Excluding cable) |
| Case Material | Titanium |
| Mounting Screw | Female screw (M5×0.8, depth 3.5) |
| Power Supply | 21 to 24 VDC, 0.5 to 10 mA |
| Cable | Dedicated cable, length approx. 3.3 m Sensor side: DR-4S-1 Measuring instrument side: BNC connector (BNC163) (Shield wire is connected to the case.) |
| Sensor ID | TEDS (IEEE1451.4) |
| Standard Accessories | Dedicated cable SA12ZSC-01B |
|---|---|
| Optional Accessories | Mount base |
Dimensions
ASPC-A-300
±4000m/s2
Specifications
| Rated Capacity | ±4000 m/s2 |
|---|---|
| Voltage Sensitivity | 1.0 mV/m/s2 ±10% |
| Resonant Frequency | Approx. 35 kHz |
| Frequency Response (±1 dB) | 1 to 5000 Hz |
| Frequency Response (±3 dB) | 1 to 8000 Hz |
| Impact Resistant | 30000 m/s2 |
| Operating Temperature | -50 to 110°C (With operating power supply: 0.5 to 5 mA) -50 to 70°C (With operating power supply: 0.5 to 10 mA) Measuring instrument side's operating temperature: -20 to 60°C |
| Transverse Sensitivity | 5% RO or less |
| Output Impedance | 1000 Ω or less |
| Weight | Approx. 11 g (Excluding cable) |
| Case Material | Titanium |
| Mounting Screw | Female screw (M5×0.8, depth 3.5) |
| Power Supply | 21 to 24 VDC, 0.5 to 10 mA |
| Cable | Dedicated cable, length approx. 3.3 m Sensor side: DR-4S-1 Measuring instrument side: BNC connector (BNC163) (Shield wire is connected to the case.) |
| Standard Accessories | Dedicated cable SA12ZSC-01B |
|---|---|
| Optional Accessories | Mount base |
Dimensions
To Ensure Safe Usage
Before measuring data by using the CCA-40A or CCA-40A-F, insulate the mounting surface between the transducer and target object.
Remarks
*Acceleration (m/s2)
= Output voltage from sensor (mV) ÷ Voltage sensitivity (mV/m/s2)
