ASQ-D
Servo Type Acceleration Transducer

Summary

The ASQ-D is a servo type acceleration transducer for accurate measuring minute vibration. A dedicated signal conditioner VAQ is available as the mating instrument.
Rated Capacity: ±9.807 to ±49.03 m/s2
Dimensions: 32.5 x 75 x 32.5 mm
Rated Output: ±5V (10 V) ±5%
Frequency Response: DC to 100 Hz

Features

• High output
• Frequency response DC to 100 Hz (DC to 300 Hz is available on request)
• IP67 (IEC 60529)

Products table

All display

ASQ-D-1
±1 g

Specifications

Performance
Rated Capacity ±9.807 m/s2(±1 G)
Nonlinearity Within ±0.03% RO
Hysteresis Within ±0.05% RO
Rated Output ±5V (10V)±5%
Environmental Characteristics
Safe Temperature -20 to 80ºC
Compensated Temperature -10 to 60ºC
Temperature Effect on Zero Within ±0.05% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Power Supply ±11 to ±16 VDC, 40 mA or less (±12 V recommended) Supplied from dedicated signal conditioner VAQ-700A if used.
Cable N-41: (Optional Accessory) (For connecting ASQ-D and VAQ-700A)
6-conductor (0.2 mm2) vinyl shielded cable, 5.8 mm diameter by 50 m long
(Sensor side: 272FCW-12P)
(Measuring instrument side: PRC03-12A10-7M)
N-42: (Optional Accessory)
(Sensor side: 272FCW-12P)
(Measuring instrument side: Bared at the tip)
1-G cancel cable: (Optional Accessory)
(WITCO OF JUPITER DENTSU CO., Ltd.)
6-conductor (0.2 mm2) vinyl shielded cable, 5.8 mm diameter by 40 cm long
(Sensor side: 272FCW-12P)
(Measuring instrument side: 272MCW-12P)
Mechanical Properties
Frequency Response DC to 100 Hz (Sensitivity deviation ±10%)
(DC to 300 Hz available on request)
Transverse Sensitivity 0.3% or less
Degrees of Protection IP67 (IEC 60529)
Weight Approx. 220 g (Excluding cable)
Standard Accessories Hexagon socket head bolts (M4, length: 25) × 2
Optional Accessories Connection cable N-41 (50 m), N-42 (5 m)
1-G cancel cable N-45 (40 cm)

Dimensions

ASQ-D

ASQ-D-2
±2 g

Specifications

Performance
Rated Capacity ±19.61 m/s2(±2 G)
Nonlinearity Within ±0.03% RO
Hysteresis Within ±0.05% RO
Rated Output ±5V(10V)±5%
Environmental Characteristics
Safe Temperature -20 to 80ºC
Compensated Temperature -10 to 60ºC
Temperature Effect on Zero Within ±0.05% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Power Supply ±11 to ±16 VDC, 40 mA or less (±12 V recommended) Supplied from dedicated signal conditioner VAQ-700A if used.
Cable N-41: (Optional Accessory) (For connecting ASQ-D and VAQ-700A)
6-conductor (0.2 mm2) vinyl shielded cable, 5.8 mm diameter by 50 m long
(Sensor side: 272FCW-12P)
(Measuring instrument side: PRC03-12A10-7M)
N-42: (Optional Accessory)
(Sensor side: 272FCW-12P)
(Measuring instrument side: Bared at the tip)
1-G cancel cable: (Optional Accessory)
(WITCO OF JUPITER DENTSU CO., Ltd.)
6-conductor (0.2 mm2) vinyl shielded cable, 5.8 mm diameter by 40 cm long
(Sensor side: 272FCW-12P)
(Measuring instrument side: 272MCW-12P)
Mechanical Properties
Frequency Response DC to 100 Hz (Sensitivity deviation ±10%)
(DC to 300 Hz available on request)
Transverse Sensitivity 0.3% or less
Degrees of Protection IP67 (IEC 60529)
Weight Approx. 220 g (Excluding cable)
Standard Accessories Hexagon socket head bolts (M4, length: 25) × 2
Optional Accessories Connection cable N-41 (50 m), N-42 (5 m)
1-G cancel cable N-45 (40 cm)

Dimensions

ASQ-D

ASQ-D-5
±5 g

Specifications

Performance
Rated Capacity ±49.03 m/s2(±5 G)
Nonlinearity Within ±0.03% RO
Hysteresis Within ±0.05% RO
Rated Output ±5V(10V)±5%
Environmental Characteristics
Safe Temperature -20 to 80ºC
Compensated Temperature -10 to 60ºC
Temperature Effect on Zero Within ±0.05% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
Power Supply ±11 to ±16 VDC, 40 mA or less (±12 V recommended) Supplied from dedicated signal conditioner VAQ-700A if used.
Cable N-41: (Optional Accessory) (For connecting ASQ-D and VAQ-700A)
6-conductor (0.2 mm2) vinyl shielded cable, 5.8 mm diameter by 50 m long
(Sensor side: 272FCW-12P)
(Measuring instrument side: PRC03-12A10-7M)
N-42: (Optional Accessory)
(Sensor side: 272FCW-12P)
(Measuring instrument side: Bared at the tip)
1-G cancel cable: (Optional Accessory)
(WITCO OF JUPITER DENTSU CO., Ltd.)
6-conductor (0.2 mm2) vinyl shielded cable, 5.8 mm diameter by 40 cm long
(Sensor side: 272FCW-12P)
(Measuring instrument side: 272MCW-12P)
Mechanical Properties
Frequency Response DC to 100 Hz (Sensitivity deviation ±10%)
(DC to 300 Hz available on request)
Transverse Sensitivity 0.3% or less
Degrees of Protection IP67 (IEC 60529)
Weight Approx. 220 g (Excluding cable)
Standard Accessories Hexagon socket head bolts (M4, length: 25) × 2
Optional Accessories Connection cable N-41 (50 m), N-42 (5 m)
1-G cancel cable N-45 (40 cm)

Dimensions

ASQ-D

VAQ-700A
ASQ Dedicated Conditioner

Specifications

When using ASQ-D-1
Channels 1
Measuring Mode Simultaneous measurement and output of acceleration, velocity and displacement
Measuring Acceleration
Measuring Range ±9.807 m/s2 (±1 G)
Range Select 0.01, 0.1, 1 g, OFF
Calibration Linked with selected range × 0.51
Accuracy ±0.5%FS to reading with both measuring range and calibration
Frequency Response DC to 300 Hz (±5%) in DC acceleration mode, 0.1 to 300 Hz (±5%) in AC acceleration mode
Measuring Velocity
Measuring Range ±100 cm/s
Range Select 1, 10, 100 cm/s, OFF
Calibration Linked with selected range × 0.5
Accuracy ±1%FS to reading with both measuring range and calibration
Frequency Response 0.1 to 100 Hz (±5%)
Measuring Displacement
Measuring Range ±100 mm
Range Select 1, 10, 100 mm, OFF
Calibration Linked with selected range × 0.5
Accuracy ±1%FS to reading with both measuring range and calibration
Frequency Response 0.1 to 60 Hz (±5%) (1 to 60 Hz, ±0.5% with a maximum sensitivity selected for the measuring range)
Output ±10 V (Load 5 kΩor more)
Operating Temperature -10 to 50ºC
Power Supply 100 VAC or 12 VDC
Dimensions-weight 49 W x 128.5 H x 262.5 D mm, approx 1.4 kg
When using ASQ-D-2
Channels 1
Measuring Mode Simultaneous measurement and output of acceleration, velocity and displacement
Measuring Acceleration
Measuring Range ±19.61 m/s2(±2 g)
Range Select 0.02, 0.2, 2 g, OFF
Calibration Linked with selected range x 0.51
Accuracy ±0.5%FS to reading with both measuring range and calibration
Frequency Response DC to 300 Hz (±5%) in DC acceleration mode, 0.1 to 300 Hz (±5%) in AC acceleration mode
Measuring Velocity
Measuring Range ±200 cm/s
Range Select 2, 20, 200 cm/s, OFF
Calibration Linked with selected range x 0.5
Accuracy ±1%FS to reading with both measuring range and calibration
Frequency Response 0.1 to 100 Hz (±5%)
Measuring Displacement
Measuring Range ±200 mm
Range Select 2, 20, 200 mm, OFF
Calibration Linked with selected range
Accuracy ±1%FS to reading with both measuring range and calibration
Frequency Response 0.1 to 60 Hz (±5%) (1 to 60 Hz (±5%) with a maximum sensitivity selected for the measuring range)
Output ±10 V (Load 5 kΩor more)
Operating Temperature -10 to 50ºC
Power Supply 100 VAC or 12 VDC
Dimensions-weight 49 W x 128.5 H x 262.5 D mm, approx 1.4 kg
When using ASQ-D-5
Channels 1
Measuring Mode Simultaneous measurement and output of acceleration, velocity and displacement
Measuring Acceleration
Measuring Range ±49.03 m/s2(±5 g)
Range Select 0.05, 0.5, 5 g, OFF
Calibration Linked with selected range x 0.51
Accuracy ±0.5%FS to reading with both measuring range and calibration
Frequency Response DC to 300 Hz (±5%) in DC acceleration mode, 0.1 to 300 Hz (±5%) in AC acceleration mode
Measuring Velocity
Measuring Range ±500 cm/s
Range Select 5, 50, 500 cm/s, OFF
Calibration Linked with selected range x 0.5
Accuracy ±1%FS to reading with both measuring range and calibration
Frequency Response 0.1 to 100 Hz (±5%)
Measuring Displacement
Measuring Range ±500 mm
Range Select 5, 50, 500 mm, OFF
Calibration Linked with selected range x 0.5
Accuracy ±1%FS to reading with both measuring range and calibration
Frequency Response 0.1 to 60 Hz (±5%) (1 to 60 Hz (±5%) with a maximum sensitivity selected for the measuring range)
Output ±10 V (Load 5 kΩ or more)
Operating Temperature -10 to 50ºC
Power Supply 100 VAC or 12 VDC
Dimensions-weight 49 W x 128.5 H x 262.5 D mm ·Approx 1.4 kg
Standard Accessories AC power cable P-16 (With a conversion adapter CM-39), output cable U-58 (3 PC.), fuse, miniature screwdriver,
Instruction Manual
Optional Accessories Housing case YC-A

Dimensions

VAQ-700A

Page Top

Download