Suitable for high sensitivity measurement of underground water level. Featuring rated output of 4000μm/m, the BPG-A-S series pore pressure transducers provide a sensitivity twice as high as ordinary units. Thus, they are suitable for precise measurement of underground water level etc. by embedding in a well, etc.
Features
●High sensitivity (4000μm/m) and high accuracy (±0.5% RO) ●Excellent temperature characteristics (±0.02% RO/℃) ●Cone filter attached (possible to replace to a flat filter)
Products table
All display
BPG-A-200KPS 200 kPa
Specifications
Performance
Rated Capacity
200 kPa
Nonlinearity
Within ±0.5% RO
Hysteresis
Within ±0.5% RO
Rated Output
2 mV/V or more
Environmental Characteristics
Safe Temperature
-20 to 70ºC (Non-freezing)
Compensated Temperature
-10 to 60ºC (Non-freezing)
Temperature Effect on Zero
Within ±0.02% RO/ºC
Temperature Effect on Output
Within ±0.02%/ºC
Electrical Characteristics
Safe Excitation
10 V AC or DC
Input Resistance
350 Ω ±1%
Output Resistance
350 Ω ±1%
Cable
4-conductor (0.5 mm2) chloroprene shielded cable,9.6 mm diameter by 1 m long, bared at the tip (Shield wire is not connected to the case.)