Displacement Transducer



The DTS-A is a displacement transducer for both tension and compression measurement.
Rated Capacity: 100 mm
Nonlinearity: Within ±0.3% RO
Measuring Force: Approx. 5 N
Rated Output: 2.5 mV/V ±10%


• Reduce creep
• Both tension and compression
• High frequency response (DC to 50 Hz when the tip is fixed)
• Strain-gage type

Products table

All display

100 mm



Rated Capacity 100 mm
Nonlinearity Within ±0.3% RO
Hysteresis Within ±0.3% RO
Repeatability 0.1% RO or less
Rated Output 2.5 mV/V ±10%
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature 0 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.05% RO/ºC
Temperature Effect on Output Within ±0.05% /ºC
Electrical Characteristics
Safe Excitation 10 V AC or DC
Recommended Excitation 1 to 5 V AC or DC
I/O Resistance In: 350 Ω ±3%
Out: 255 Ω ±10%
Cable 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 1 m long, terminated with a connector plug PRC03-12A10-7M
(Shield wire is not connected to the case.)
Mechanical Properties
Frequency Response DC to approx. 6 Hz (When the tip is touching to the testing machine, displacement: 100 mm)
(Reference: DC to approx. 50 Hz, when the tip is fixed, displacement: 30 mm)
Measuring Force Approx. 5 N
Weight Approx. 110 g (Excluding cable)
Degree of Protection IP40 (IEC 60529)
Standard Accessories Mounting band FXBP-100A: 2
Adapter: 1
Optional Accessories Extension rods: EB-50, EB-100, EB-200, EB-300
Mounting band FXBP-100A
Replacement probes: X, XS, SH



Page Top


(Note 1) Do not apply any displacement in other than expansion/contraction direction of the rod.
*CE compliant models are available. Inquiries are welcome.



Recommended products for combination