DWT-C-SA1
Compact Three Dimensional Displacement Sensor

DWT-C-SA1

Summary

Dynamic 3D behavior measurements in narrow spaces by easy installation

Features

●Height: 78.5 mm; Weight: Approx. 50 g
Minimal impact on objects for measurement due to its small size and light weight
●More space-saving and shorter preparation times
compared to 3D measurements using a linear displacement sensor
●Measure the wrap-around behavior that is the blind spot of the camera.
●Easy to install
(by adhesive, double-sided tape and L-angle)

Products table

All display

DWT-C-SA1
Compact Three Dimensional Displacement Sensor

DWT-C-SA1

Specifications

Performance
Rated Capacity 【For 3-axis measurement】
X axis: 0 to 25 mm
Y axis: -10 to 10 mm
Z axis: -30 to 0 mm
【For uni axial measurement】
X axis: -15 to 25 mm
Y axis: -10 to 10 mm
Z axis: -30 to 0 mm
* Contact us for changing specifications.
Nonlinearity ±1.5% FS (On the coordinate axis, static condition)
Hysteresis ±1.5% FS (On the coordinate axis, static condition)
Environmental Characteristics
Safe Temperature -20 to 70℃ (Non-condensing)
Compensated Temperature -20 to 70℃ (Non-condensing)
Electrical Characteristics
Recommended Excitation 5 VDC
Cable 4-conductor (0.035 mm2) vinyl shielded cable, 1.7 mm diameter by 2 m long, terminated with connector plug NDIS4102 (7 pins) × 3
(Shield wire is not connected to the case.)
Mechanical Properties
Frequency Response DC to 30 Hz (Sensitivity deviation ±10%)
Weight Approx. 50 g (Excluding cable)
Degree of Protection IP42 (IEC 60529)

Page Top

eBook

Download

Recommended products for combination