LBT-E-SA1-IDT
Seat Belt Tension Transducer

  • TEDS

Summary

Even more compact and lightweight than former models. Additionally, the LBT-E-SA1-IDT improved nonlinearity with a built-in compensation circuit.
This product has 2 types - left seat type and right seat type - depending on the cable direction. Cable exchangeable model is also available by using connectors.

Features

●Compact and lightweight
●Improved nonlinearity

Products table

All display

LBT-E-15KNS-IDT
15 kN

  • TEDS

Specifications

Performance
Rated Capacity 15 kN
Nonlinearity Within ±1.5% RO
(With a built-in compensation circuit)
Rated Output Approx. 1.5 mV/V
Environmental Characteristics
Safe Temperature 0 to 60ºC
Compensated Temperature 10 to 50ºC
Temperature Effect on Zero Within ±0.1% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Safe Excitation 8 VDC
Recommended Excitation 2 to 5 VDC
Input Resistance 240 to 440 Ω
Output Resistance 240 Ω ±7%
Insulation Resistance 500 MΩ or more (With 25 VDC applied)
Cable 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 7 m long, terminated with a connector plug
(Measuring instrument side: 3RT01-PE7M (TEDS installed))
(Shield wire is not connected to the case.)
Mechanical Properties
Safe Overloads 120%
Enclosure Metallic finish
Material Aluminum alloy and stainless steel
Weight Approx. 72 g
Others Because this product has a built-in compensation circuit,use with excitation voltage of 2 to 5 VDC.
(No specifications guarantee if less than 2 V excitation is used.)
Data on the "Test Data Sheet" is based on 2 V bridge excitation.
This product has 2 types - left seat type and right seat type - depending on the direction in which the cable comes out.
Not waterproofed.
Single belt calibration (Our standard seat belt).
We accept calibration for the supplied seat belt.
Cable exchangeable model is also available by using connectors.

Dimensions

LBT-E

LBT-E-20KNS-IDT
20 kN

  • TEDS

Specifications

Performance
Rated Capacity 20 kN
Nonlinearity Within ±2.0% RO
(With a built-in compensation circuit)
Rated Output Approx. 1.0 mV/V
Environmental Characteristics
Safe Temperature 0 to 60ºC
Compensated Temperature 10 to 50ºC
Temperature Effect on Zero Within ±0.1% RO/ºC
Temperature Effect on Output Within ±0.1%/ºC
Electrical Characteristics
Safe Excitation 8 VDC
Recommended Excitation 2 to 5 VDC
Input Resistance 240 to 440 Ω
Output Resistance 240 Ω ±7%
Insulation Resistance 500 MΩ or more (With 25 VDC applied)
Cable 4-conductor (0.08 mm2) vinyl shielded cable, 3.2 mm diameter by 7 m long, terminated with a connector plug
(Measuring instrument side: 3RT01-PE7M (TEDS installed))
(Shield wire is not connected to the case.)
Mechanical Properties
Safe Overloads 100%
Enclosure Metallic finish
Material Aluminum alloy and stainless steel
Weight Approx. 72 g
Others Because this product has a built-in compensation circuit, use with excitation voltage of 2 to 5 VDC.
(No specifications guarantee if less than 2 V excitation is used.)
Data on the "Test Data Sheet" is based on 2 V bridge excitation.
This product has 2 types - left seat type and right seat type - depending on
the direction in which the cable comes out.
Not waterproofed.
Single belt calibration (Our standard seat belt)
We accept calibration for the supplied seat belt.
Cable exchangeable model is also available by using connectors.

Dimensions

LBT-E

Page Top

Remarks

Note) Characteristic values are based on our calibration methods and conditions.
This product is for the single belt only.

Download

Recommended products for combination