LCX-A-ID
Small-sized Compression Load Cell
Summary
The LCX-A-ID is a stainless-steel load cell, for measuring compressive loads. It is compact & lightweight.
Rated Capacity: 500 N to 20 kN
Diameter: 28 mm (500 N to 2 kN), 43 mm (5 kN to 20 kN)
Nonlinearity: Within ±0.1% RO
Features
• Easily replace cables
• Exchange to a bending resistance cable possible
• TEDS installed
Products table
All display
LCX-A-500N-ID
500 N
Specifications
Performance
| Rated Capacity | 500 N |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | Within 1.0 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 70°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.01% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Safe Lateral Loads | 15% the rated capacity |
| Natural Frequencies | Approx. 24 kHz |
| Materials | Stainless steel |
| Weight | Approx. 45 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Saddle CA Mount base CX |
|---|
Dimensions
LCX-A-1KN-ID
1 kN
Specifications
Performance
| Rated Capacity | 1 kN |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 70°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.005% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Safe Lateral Loads | 15% the rated capacity |
| Natural Frequencies | Approx. 29 kHz |
| Materials | Stainless steel |
| Weight | Approx. 45 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Saddle CA Mount base CX |
|---|
Dimensions
LCX-A-2KN-ID
2 kN
Specifications
Performance
| Rated Capacity | 2 kN |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 70°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.005% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Safe Lateral Loads | 15% the rated capacity |
| Natural Frequencies | Approx. 37 kHz |
| Materials | Stainless steel |
| Weight | Approx. 45 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Saddle CA Mount base CX |
|---|
Dimensions
LCX-A-5KN-ID
5 kN
Specifications
Performance
| Rated Capacity | 5 kN |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 70°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.005% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Safe Lateral Loads | 15% the rated capacity |
| Natural Frequencies | Approx. 24 kHz |
| Materials | Stainless steel |
| Weight | Approx. 120 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Saddle CA Mount base CX |
|---|
Dimensions
LCX-A-10KN-ID
10 kN
Specifications
Performance
| Rated Capacity | 10 kN |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 70°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.005% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Safe Lateral Loads | 15% the rated capacity |
| Natural Frequencies | Approx. 28 kHz |
| Materials | Stainless steel |
| Weight | Approx. 120 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Saddle CA Mount base CX |
|---|
Dimensions
LCX-A-20KN-ID
20 kN
Specifications
Performance
| Rated Capacity | 20 kN |
|---|---|
| Nonlinearity | Within ±0.1% RO |
| Hysteresis | Within ±0.1% RO |
| Repeatability | 0.05% RO or less |
| Rated Output | Within 1.5 mV/V or more |
Environmental Characteristics
| Safe Temperature | -20 to 80°C (Non-condensing) |
|---|---|
| Compensated Temperature | -10 to 70°C (Non-condensing) |
| Temperature Effect on Zero | Within ±0.005% RO/ºC |
| Temperature Effect on Output | Within ±0.005%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 375 Ω ±1.5% |
| Output Resistance | 350 Ω ±1% |
| Cable | Model: TE-45 6-conductor (0.08 mm2) chloroprene shielded cable,4.4 mm diameter by 3 m long Sensor side: Terminated with a connector plug 213FCW-8P Measuring instrument side: Bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Safe Lateral Loads | 15% the rated capacity |
| Natural Frequencies | Approx. 37 kHz |
| Materials | Stainless steel |
| Weight | Approx. 120 g (Excluding cable) |
| Degree of Protection | IP67 (IEC 60529) |
| Optional Accessories | Saddle CA Mount base CX |
|---|
Dimensions
Mount Base
CX-5
Mount Base
| Object Product Model | LCX-A-500N-ID LCX-A-1KN-ID LCX-A-2KN-ID |
|---|---|
| Weight (Approx.) | Approx.100 g |
CX-7
Mount Base
| Object Product Model | LCX-A-500N-ID LCX-A-1KN-ID LCX-A-2KN-ID |
|---|---|
| Weight (Approx.) | 280 g |
CA-2F
Saddle
| Object Product Model | LCN-A LCX-A-ID |
|---|
Remarks
Work is also possible if the cable is replaced with one resistant to repeated bending (flexible cable). Please add M1Z3K to the end of the model name.
