LFX-A
Compact 6-component Force Transducer with Built-in Amplifier

Summary

The LFX-A is a 6-component force transducer with built-in Amplifiers. It enables simultaneous measurement of 3 components of force (Fx, Fy, Fz) in 3 axial directions and 3 moments (Mx, My, Mz) around the axes. Hollowed structure for wiring easily.
Rated Capacity: 1 kN, 3 kN
Diameter: 66 mm
Nonlinearity: Within ±0.5% RO

Features

• Compact & lightweight
• Outputs 6 voltage signals proportionated to 6 detected components.
• Most suitable for reletively simple experments

Products table

All display

LFX-A-1KN
1kN

Specifications

Performance
Rated Capacity Fx : ±1 kN
Fy : ±1 kN
Fz : ±1 kN
Mx : ±40 N·m
My : ±40 N·m
Mz : ±25 N·m
Nonlinearity Within ±0.5% RO
Hysteresis Within ±0.5% RO
Interference ±1.5% RO (After correction by interference compensated coefficients stated in the Test Data Sheet)
*Output voltage signals of 6-component force should be compensated by using the interference compensated coefficients. The output interfere with each other.
Rated Output Approx. 1500 mV (From 2500 mV output with no load at the center, after compensation)
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature 0 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.05% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
No-load Output 2500 mV at the center
Cutoff Frequencies of AMP 500 Hz (Amplitude ratio at cutoff point -3 ±1dB)
Power Supply 5 VDC ±10%, 160 mA or less
Cable 16-conductor ( 0.08 mm2) twisted pair vinyl shielded cable, 6.6 mm diameter by 55 cm long, bared at the tip (9 conductors)
(Shield wire is not connected to the case.)

Signal Name······Coating color······Mark
Fx····················Orange·············Red
Fy····················Gray················Red
Fz····················White···············Red
Mx····················Orange············Black
My····················Gray···············Black
Mz····················White··············Black
COM·················Blue
DC+5V··············Red
DC0V················Black
Shield
Mechanical Properties
Safe Overloads 150%
Materials Main unit: Aluminum
Cover: Black anode oxidized coated aluminum
Cable holder: Anode oxidized coated aluminum
Weight Approx. 210 g (Excluding cable)
Degree of Protection IP40 (IEC 60529)
Other The rated output, nonlinearity, hysteresis, and interference are the value at the time of load calibration on the moment center.
* To obtain the rated output of ±1500 mV for each of 6-component force, zero drift due to installation conditions including tightening and loading should be made within ±200 mV.

Dimensions

LFX-A-3KN
3kN

Specifications

Performance
Rated Capacity Fx : ±3 kN
Fy : ±3 kN
Fz : ±3 kN
Mx : ±100 N·m
My : ±100 N·m
Mz : ±50 N·m
Nonlinearity Within ±0.5% RO
Hysteresis Within ±0.5% RO
Interference ±1.5% RO (After correction by interference compensated coefficients stated in the Test Data Sheet)
*Output voltage signals of 6-component force should be compensated by using the interference compensated coefficients. The output interfere with each other.
Rated Output Approx. 1500 mV (From 2500 mV output with no load at the center, after compensation)
Environmental Characteristics
Safe Temperature -10 to 70ºC (Non-condensing)
Compensated Temperature 0 to 60ºC (Non-condensing)
Temperature Effect on Zero Within ±0.05% RO/ºC
Temperature Effect on Output Within ±0.05%/ºC
Electrical Characteristics
No-load Output 2500 mV at the center
Cutoff Frequencies of AMP 500 Hz (Amplitude ratio at cutoff point -3 ±1dB)
Power Supply 5 VDC ±10%, 160 mA or less
Cable 16-conductor ( 0.08 mm2) twisted pair vinyl shielded cable, 6.6 mm diameter by 55 cm long, bared at the tip (9 conductors)
(Shield wire is not connected to the case.)
Signal Name······Coating color······Mark
Fx····················Orange·············Red
Fy····················Gray················Red
Fz····················White···············Red
Mx····················Orange············Black
My····················Gray···············Black
Mz····················White··············Black
COM·················Blue
DC+5V··············Red
DC0V················Black
Shield
Mechanical Properties
Safe Overloads 150%
Materials Main unit: SUS
Cover: Black anode oxidized coated aluminum
Cable holder: Anode oxidized coated aluminum
Weight Approx. 420 g (Excluding cable)
Degree of Protection IP40 (IEC 60529)
Other The rated output, nonlinearity, hysteresis, and interference are the value at the time of load calibration on the moment center.
* To obtain the rated output of ±1500 mV for each of 6-component force, zero drift due to installation conditions including tightening and loading should be made within ±200 mV.

Dimensions

Page Top

eBook

Download

Recommended products for combination