Highly Stable Current-output Pressure Transducer


The PAG-A is a highly stable current-output pressure transducer and output signals from 4 to 20 mA. It is hermetically-sealed structure with inert gas filled in. The amplifier enables to provide high-frequency radio noise resistant.
Rated Capacity: 200 kPa
Compensated Temperature: -20 to 70ºC


• High reliability
• High resolution
• Strong against noise

Products table

All display

200 kPa


Rated Capacity 200 kPa
Nonlinearity Within ±0.1% RO
Hysteresis Within ±0.2% RO
Current Output 4 to 20 mA
Environmental Characteristics
Safe Temperature -20 to 75ºC
Compensated Temperature -20 to 70ºC
Temperature Effect on Zero Within ±0.03% RO/ºC
Temperature Effect on Output Within ±0.01%/ºC
Zero Stability Within ±0.5% RO/year
Electrical Characteristics
SN Ratio 60 dB or more
Load Resistance 0 to 500 Ω
Cutoff Frequencies of AMP 650 Hz (Amplitude ratio at cutoff point -3 ±1 dB)
Power Supply 24 VDC (21 to 30 V), 30 mA or less
Cable 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 5 m long
Sensor side: Terminated with a waterproof connector plug 1108-12A10-7F
Measuring instrument side: Bared at the tip (Use 3 conductors only.)
(Shield wire is not connected to the case.)
Mechanical Properties
Safe Overloads 150%
Materials Case: SUS (Metallic finish)
Liquid-contacting part: SUS 630
Weight Approx. 270 g (Excluding cable)
Degree of Protection IP62 (IEC 60529)
Mounting Screw G3/8, male
Standard Accessories Gasket (Mild copper)



Page Top


Recommended products for combination