PG-H
Pressure Transducer
Summary
The PG-H is a pressure transducer with hermetically sealed with inert gas filled in.
Rated Capacity: 100, 200 MPa
Compensated Temperature: -10 to 70ºC
Features
• Highly reliable
• Highly accurate
• High strength
Products table
All display
PG-1TH
100 MPa
Specifications
Performance
| Rated Capacity | 100 MPa |
|---|---|
| Nonlinearity | Within ±0.2% RO |
| Hysteresis | Within ±0.2% RO |
| Repeatability | 0.15% RO or less |
| Rated Output | 1.5 mV/V ±0.5% |
Environmental Characteristics
| Safe Temperature | -20 to 80ºC |
|---|---|
| Compensated Temperature | -10 to 70ºC |
| Temperature Effect on Zero | Within ±0.02% RO/ºC |
| Temperature Effect on Output | Within ±0.01%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 350 Ω ±1.5% |
| Output Resistance | 350 Ω ±1.5% |
| Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 3 m long Sensor side: Terminated with a waterproof connector plug 1108-12A10-7F Measuring instrument side: Terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Natural Frequencies | Approx. 250 kHz |
| Material | Case: Stainless steel Liquid-contacting part: SUS 630 |
| Weight | Approx. 220 g (Excluding cable) |
| Degree of Protection | IP52 (IEC 60529) |
| Mounting Screw | G1/2, male |
| Standard Accessories | Gasket (Mild copper) |
|---|
Dimensions
PG-2TH
200 MPa
Specifications
Performance
| Rated Capacity | 200 MPa |
|---|---|
| Nonlinearity | Within ±0.2% RO |
| Hysteresis | Within ±0.2% RO |
| Repeatability | 0.15% RO or less |
| Rated Output | 1.5 mV/V ±0.5% |
Environmental Characteristics
| Safe Temperature | -20 to 80ºC |
|---|---|
| Compensated Temperature | -10 to 70ºC |
| Temperature Effect on Zero | Within ±0.02% RO/ºC |
| Temperature Effect on Output | Within ±0.01%/ºC |
Electrical Characteristics
| Safe Excitation | 15 V AC or DC |
|---|---|
| Recommended Excitation | 1 to 10 V AC or DC |
| Input Resistance | 350 Ω ±1.5% |
| Output Resistance | 350 Ω ±1.5% |
| Cable | 4-conductor (0.3 mm2) chloroprene shielded cable, 7.6 mm diameter by 3 m long Sensor side: Terminated with a waterproof connector plug 1108-12A10-7F Measuring instrument side: Terminated with a connector plug PRC03-12A10-7M (Shield wire is not connected to the case.) |
Mechanical Properties
| Safe Overloads | 150% |
|---|---|
| Natural Frequencies | Approx. 250 kHz |
| Material | Case: Stainless steel Liquid-contacting part: SUS 630 |
| Weight | Approx. 220 g (Excluding cable) |
| Degree of Protection | IP52 (IEC 60529) |
| Mounting Screw | G1/2, male |
| Standard Accessories | Gasket (Mild copper) |
|---|
Dimensions
Remarks
*CE compliant models are available. Inquiries are welcome.
