The PS-C is a miniature pressure sensor with a strain-gage bridge inside. The cable direction is parallel to the sensor surface. Rated Capacity: 50 kPa to 7 MPa Compensated Temperature: 0 to 50ºC
Features
• Ultra-thin • Installed by adhesives • Suitable for distributed pressure measurement by using multiple units
Products table
All display
PS-05KC 50 kPa
Specifications
Performance
Rated Capacity
50 kPa
Nonlinearity
Within ±1% RO
Hysteresis
Within ±1% RO
Rated Output
0.25 mV/V or more Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.8% RO/ºC
Temperature Effect on Output
Within ±0.3%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 10 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
0.5 mV/V or more Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.4% RO/ºC
Temperature Effect on Output
Within ±0.3%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 10 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
0.85 mV/V ±30% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.3% RO/ºC
Temperature Effect on Output
Within ±0.3%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 14 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.2% RO/ºC
Temperature Effect on Output
Within ±0.2%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 20 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.2% RO/ºC
Temperature Effect on Output
Within ±0.2%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 37 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.2% RO/ºC
Temperature Effect on Output
Within ±0.2%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 46 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.2% RO/ºC
Temperature Effect on Output
Within ±0.2%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 58 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.2% RO/ºC
Temperature Effect on Output
Within ±0.2%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
150%
Natural Frequencies
Approx. 71 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
1 mV/V ±20% Note: Rated output is sorted to one of the classes divided by every 2% difference in output value. Since the rated output stated in the Test Data Sheet is the center value of the class, it may include a maximum error of ±1%.
Cable Direction to Sensing Surface
Horizontal
Environmental Characteristics
Safe Temperature
-20 to 70ºC
Compensated Temperature
0 to 50ºC
Temperature Effect on Zero
Within ±0.2% RO/ºC
Temperature Effect on Output
Within ±0.2%/ºC
Electrical Characteristics
Safe Excitation
3 V AC or DC
Recommended Excitation
1 to 2 V AC or DC
Input Resistance
350 Ω ±10%
Output Resistance
350 Ω ±10%
Cable
Polyurethane coated copper wires, 0.1 mm diameter by 5 cm long, bared at the tip
Mechanical Properties
Safe Overloads
100%
Natural Frequencies
Approx. 86 kHz
Weight
Approx. 0.5 g (Excluding cable)
Materials
Metallic finish
Dedicated Adhesive
RC-19 (Request the RC-19 when ordering the transducer.Cost option)
(Note 1) Copper alloy is used for liquid-contacting part. Avoid measuring corrosive liquid or gas. (Note 2) Epoxy adhesive has been used to assemble the liquid-contacting part. Avoid measuring organic solvent (toluene, ketone, etc.). (Note 3) Measuring liquids of 20 to 70K are limited to oil.
