Measure displacement of ground surface and output signals to indicator, recorder or alarm. Installed in locations where landslide or collapse is suspected, this system measures displacement of the ground surface. The potentiometer sensor detects fluctuation of ground surface and an invar line extended from the fixed pile transmits the ground surface displacement, which is converted to a corresponding voltage by rotating the displacement transmission shaft. The electrical output can be connected to various instruments for indication, recording or alarm. A desired rated capacity can be selected from 50 or 100 mm.
Products table
All display
SSD-510TSA Elongation Measuring System
Specifications
Performance
Rated Capacity
50 or 100 mm (Selected by rudder wheel)
Nonlinearity
Within ±1% RO
Hysteresis
Within ±1% RO
Rated Output
1.25 mV/V or more
Environmental Characteristics
Safe Temperature
-10 to 70ºC
Compensated Temperature
0 to 60ºC
Temperature Effect on Zero
Within ±0.1% RO/ºC (*)
Temperature Effect on Output
Within ±0.1%/ºC (*)
Electrical Characteristics
Detection Method
Potentiometer-type
Safe Excitation
10 V AC or DC
Input Resistance
350 Ω ±2%
Output Resistance
350 Ω ±5%
Cable
4-conductor (0.5 mm2) chloroprene shielded cable, 8 mm diameter by 1 m long, bared at the tip