KFGS Series
General-purpose Foil Strain Gages

Summary
New strain gages with the world highest level performance.
Click here for the [Typical Strain Gage Bonding Procedure]
Click here for the [Strain Gages with Pre-attached Lead Cables]
Major Properties
Materials Resistive element | CuNi alloy foil |
---|---|
Materials Base | Polyimide |
Operating temperature in combination with major adhesives after curing (°C) | CC-33A: -196 to 120ºC CC-35: -10 to 120ºC CC-36: -30 to 100ºC EP-340: -55 to 150ºC PC-600: -196 to 150ºC |
Operating temperature in combination with major leadwire cables (°C) | Polyester-coated copper wire: -196 to 150ºC Vinyl-coated flat cable (L-6, L-7): -10 to 80ºC Mid-temperature cable (L-11, L-12): -100 to 150ºC |
Self-temperature-compensation (°C) | 10 to 100ºC |
Applicable linear expansion coefficients (×10-6/℃) | 5, 11, 16, 23, 27 |
Strain limits at normal temp. (approx. %) | 5.0 |
Fatigue lives at normal temp. (times) | 1.2x107 (±1500μm/m) |
Relative images

Contents
When ordering, specify the model of the strain gage and the code of the lead-wire cable with a space in between.
E.g.
KFGS-5-120-C1-11 With 2 polyester-coated copper wires 15 cm long
→KFGS-5-120-C1-11 N15C2
KFGS-5-120-C1-11 With a vinyl-coated flat 2-wire cable 5 m long
→KFGS-5-120-C1-11 L5M2R
KFGS-5-120-D17-11 With a vinyl-coated flat 3-wire cable 5 m long
→KFGS-5-120-D17-11 L5M3S
KFGS-5-120-C1-11 With a mid-temperature 3-wire cable 5 m long
→KFGS-5-120-C1-11 R5M3
KFGS-5-120-D17-11 With a mid-temperature 2-wire cable 5 m long
→KFGS-5-120-D17-11 R5M2
If no lead-wire cable code is suffixed, the gage is delivered with gage leads only.
(Silver-covered copper wires 25 mm long)
Products table
All display
KFGS 120Ω Uniaxial

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-30-120-C1-11 | 30 | 3.3 | 37 | 5.2 | |
KFGS-30-120-C1-16 | 30 | 3.3 | 37 | 5.2 | |
KFGS-30-120-C1-23 | 30 | 3.3 | 37 | 5.2 | |
KFGS-30-120-C1-27 | 30 | 3.3 | 37 | 5.2 | |
KFGS-20-120-C1-11 | 20 | 5 | 28 | 8 | |
KFGS-20-120-C1-16 | 20 | 5 | 28 | 8 | |
KFGS-20-120-C1-23 | 20 | 5 | 28 | 8 | |
KFGS-20-120-C1-27 | 20 | 5 | 28 | 8 | |
KFGS-10-120-C1-11 | 10 | 3 | 16 | 5.2 | |
KFGS-10-120-C1-16 | 10 | 3 | 16 | 5.2 | |
KFGS-10-120-C1-23 | 10 | 3 | 16 | 5.2 | |
KFGS-10-120-C1-27 | 10 | 3 | 16 | 5.2 | |
KFGS-6-120-C1-11 | 6 | 1.7 | 10 | 3.4 | |
KFGS-6-120-C1-16 | 6 | 1.7 | 10 | 3.4 | |
KFGS-6-120-C1-23 | 6 | 1.7 | 10 | 3.4 | |
KFGS-6-120-C1-27 | 6 | 1.7 | 10 | 3.4 | |
KFGS-5-120-C1-5 | 5 | 1.4 | 9.4 | 2.8 | |
KFGS-5-120-C1-11 | 5 | 1.4 | 9.4 | 2.8 | |
KFGS-5-120-C1-16 | 5 | 1.4 | 9.4 | 2.8 | |
KFGS-5-120-C1-23 | 5 | 1.4 | 9.4 | 2.8 | |
KFGS-5-120-C1-27 | 5 | 1.4 | 9.4 | 2.8 | |
KFGS-4N-120-C1-11 | 4 | 0.7 | 8 | 1.4 | |
KFGS-4N-120-C1-16 | 4 | 0.7 | 8 | 1.4 | |
KFGS-4N-120-C1-23 | 4 | 0.7 | 8 | 1.4 | |
KFGS-4N-120-C1-27 | 4 | 0.7 | 8 | 1.4 | |
KFGS-3-120-C1-11 | 3 | 1.3 | 7.4 | 2.8 | |
KFGS-3-120-C1-16 | 3 | 1.3 | 7.4 | 2.8 | |
KFGS-3-120-C1-23 | 3 | 1.3 | 7.4 | 2.8 | |
KFGS-3-120-C1-27 | 3 | 1.3 | 7.4 | 2.8 | |
KFGS-2-120-C1-11 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-2-120-C1-16 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-2-120-C1-23 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-2-120-C1-27 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-2N-120-C1-11 | 2 | 0.84 | 5.3 | 1.4 | |
KFGS-2N-120-C1-16 | 2 | 0.84 | 5.3 | 1.4 | |
KFGS-2N-120-C1-23 | 2 | 0.84 | 5.3 | 1.4 | |
KFGS-2N-120-C1-27 | 2 | 0.84 | 5.3 | 1.4 | |
KFGS-1-120-C1-11 | 1 | 1.1 | 4.8 | 2.4 | |
KFGS-1-120-C1-16 | 1 | 1.1 | 4.8 | 2.4 | |
KFGS-1-120-C1-23 | 1 | 1.1 | 4.8 | 2.4 | |
KFGS-1-120-C1-27 | 1 | 1.1 | 4.8 | 2.4 | |
KFGS-1N-120-C1-11 | 1 | 0.65 | 4.2 | 1.4 | |
KFGS-1N-120-C1-16 | 1 | 0.65 | 4.2 | 1.4 | |
KFGS-1N-120-C1-23 | 1 | 0.65 | 4.2 | 1.4 | |
KFGS-1N-120-C1-27 | 1 | 0.65 | 4.2 | 1.4 | |
KFGS-03-120-C1-11 | 0.3 | 1.4 | 3.5 | 2.4 | |
KFGS-03-120-C1-16 | 0.3 | 1.4 | 3.5 | 2.4 | |
KFGS-03-120-C1-23 | 0.3 | 1.4 | 3.5 | 2.4 | |
KFGS-03-120-C1-27 | 0.3 | 1.4 | 3.5 | 2.4 | |
KFGS-02-120-C1-11 | 0.2 | 1.4 | 3.3 | 2.4 | |
KFGS-02-120-C1-16 | 0.2 | 1.4 | 3.3 | 2.4 | |
KFGS-02-120-C1-23 | 0.2 | 1.4 | 3.3 | 2.4 | |
KFGS-02-120-C1-27 | 0.2 | 1.4 | 3.3 | 2.4 |
KFGS 120Ω Biaxial, 0°/90°stacked rosette

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-10-120-D16-11 | 10 | 3 | φ21 | ||
KFGS-10-120-D16-16 | 10 | 3 | φ21 | ||
KFGS-10-120-D16-23 | 10 | 3 | φ21 | ||
KFGS-10-120-D16-27 | 10 | 3 | φ21 | ||
KFGS-5-120-D16-11 | 5 | 1.4 | φ11 | ||
KFGS-5-120-D16-16 | 5 | 1.4 | φ11 | ||
KFGS-5-120-D16-23 | 5 | 1.4 | φ11 | ||
KFGS-5-120-D16-27 | 5 | 1.4 | φ11 | ||
KFGS-3-120-D16-11 | 3 | 1.3 | φ10 | ||
KFGS-3-120-D16-16 | 3 | 1.3 | φ10 | ||
KFGS-3-120-D16-23 | 3 | 1.3 | φ10 | ||
KFGS-3-120-D16-27 | 3 | 1.3 | φ10 | ||
KFGS-2-120-D16-11 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D16-16 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D16-23 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D16-27 | 2 | 1.2 | φ8 | ||
KFGS-1-120-D16-11 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D16-16 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D16-23 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D16-27 | 1 | 1.1 | φ5 |
KFGS 120Ω Triaxial, 0°/90°/45° stacked rosette for stress analysis

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-10-120-D17-11 | 10 | 3 | φ21 | ||
KFGS-10-120-D17-16 | 10 | 3 | φ21 | ||
KFGS-10-120-D17-23 | 10 | 3 | φ21 | ||
KFGS-10-120-D17-27 | 10 | 3 | φ21 | ||
KFGS-5-120-D17-11 | 5 | 1.4 | φ11 | ||
KFGS-5-120-D17-16 | 5 | 1.4 | φ11 | ||
KFGS-5-120-D17-23 | 5 | 1.4 | φ11 | ||
KFGS-5-120-D17-27 | 5 | 1.4 | φ11 | ||
KFGS-3-120-D17-11 | 3 | 1.3 | φ10 | ||
KFGS-3-120-D17-16 | 3 | 1.3 | φ10 | ||
KFGS-3-120-D17-23 | 3 | 1.3 | φ10 | ||
KFGS-3-120-D17-27 | 3 | 1.3 | φ10 | ||
KFGS-2-120-D17-16 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D17-11 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D17-23 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D17-27 | 2 | 1.2 | φ8 | ||
KFGS-1-120-D17-11 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D17-16 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D17-23 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D17-27 | 1 | 1.1 | φ5 |
KFGS 120Ω Biaxial, 0°/90°plane arrangement

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D1-11 | 2 | 3.2 | 10 | 8.5 | |
KFGS-2-120-D1-16 | 2 | 3.2 | 10 | 8.5 | |
KFGS-2-120-D1-23 | 2 | 3.2 | 10 | 8.5 | |
KFGS-2-120-D1-27 | 2 | 3.2 | 10 | 8.5 |
KFGS 120Ω Biaxial, 0°/90°, plane arrangement (for torque)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D2-11 | 2 | 3.4 | 12 | 7 | |
KFGS-2-120-D2-16 | 2 | 3.4 | 12 | 7 | |
KFGS-2-120-D2-23 | 2 | 3.4 | 12 | 7 | |
KFGS-2-120-D2-27 | 2 | 3.4 | 12 | 7 |
KFGS 120Ω Biaxial, 0°/90°, plane arrangement (for torque)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D31-11 | 2 | 1.2 | 8 | 6.5 | |
KFGS-2-120-D31-16 | 2 | 1.2 | 8 | 6.5 | |
KFGS-2-120-D31-23 | 2 | 1.2 | 8 | 6.5 | |
KFGS-2-120-D31-27 | 2 | 1.2 | 8 | 6.5 |
KFGS 120Ω Triaxial, 0°/90°/45°, plane arrangement

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D3-11 | 2 | 3.6 | 11 | 11 | |
KFGS-2-120-D3-16 | 2 | 3.6 | 11 | 11 | |
KFGS-2-120-D3-23 | 2 | 3.6 | 11 | 11 | |
KFGS-2-120-D3-27 | 2 | 3.6 | 11 | 11 |
KFGS 120Ω Triaxial, 0°/120°/240°, plane arrangement

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D4-11 | 2 | 3.4 | 12 | 12 | |
KFGS-2-120-D4-16 | 2 | 3.4 | 12 | 12 | |
KFGS-2-120-D4-23 | 2 | 3.4 | 12 | 12 | |
KFGS-2-120-D4-27 | 2 | 3.4 | 12 | 12 | |
KFGS-1-120-D4-11 | 1 | 1.7 | 7 | 7 | |
KFGS-1-120-D4-16 | 1 | 1.7 | 7 | 7 | |
KFGS-1-120-D4-23 | 1 | 1.7 | 7 | 7 | |
KFGS-1-120-D4-27 | 1 | 1.7 | 7 | 7 |
KFGS 120Ω Quadraxial, 0°/30°/90°/150°, plane arrangement

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D6-11 | 2 | 3.1 | 17 | 17 | |
KFGS-2-120-D6-16 | 2 | 3.1 | 17 | 17 | |
KFGS-2-120-D6-23 | 2 | 3.1 | 17 | 17 | |
KFGS-2-120-D6-27 | 2 | 3.1 | 17 | 17 |
KFGS 120Ω Uniaxial, with lead wires from both ends

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-1-120-C2-11 | 1 | 1.8 | 5.6 | 3 | |
KFGS-1-120-C2-16 | 1 | 1.8 | 5.6 | 3 | |
KFGS-1-120-C2-23 | 1 | 1.8 | 5.6 | 3 | |
KFGS-1-120-C2-27 | 1 | 1.8 | 5.6 | 3 |
KFGS 120Ω Uniaxial, with lead wires from both ends

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-1-120-C3-11 | 1 | 1.8 | 5.5 | 2.7 | |
KFGS-1-120-C3-16 | 1 | 1.8 | 5.5 | 2.7 | |
KFGS-1-120-C3-23 | 1 | 1.8 | 5.5 | 2.7 | |
KFGS-1-120-C3-27 | 1 | 1.8 | 5.5 | 2.7 |
KFGS 120Ω Uniaxial (for shearing strain)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-C15-11 | 2 | 0.8 | 5.2 | 3 | |
KFGS-2-120-C15-16 | 2 | 0.8 | 5.2 | 3 | |
KFGS-2-120-C15-23 | 2 | 0.8 | 5.2 | 3 | |
KFGS-2-120-C15-27 | 2 | 0.8 | 5.2 | 3 |
KFGS 120Ω Uniaxial (for shearing strain)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-C16-11 | 2 | 0.8 | 5.2 | 3 | |
KFGS-2-120-C16-16 | 2 | 0.8 | 5.2 | 3 | |
KFGS-2-120-C16-23 | 2 | 0.8 | 5.2 | 3 | |
KFGS-2-120-C16-27 | 2 | 0.8 | 5.2 | 3 |
KFGS 120Ω Uniaxial 5-element (for concentrated stress measurement)

- Pre-attached type: 2 polyester-coated copper wires (10 cm) + the specified lead-wire cable
Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
5 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D9-11 | 2 | 2.2 | 17 | 5 | |
KFGS-2-120-D9-16 | 2 | 2.2 | 17 | 5 | |
KFGS-2-120-D9-23 | 2 | 2.2 | 17 | 5 | |
KFGS-2-120-D9-27 | 2 | 2.2 | 17 | 5 | |
KFGS-1-120-D9-11 | 1 | 1.4 | 12 | 4 | |
KFGS-1-120-D9-16 | 1 | 1.4 | 12 | 4 | |
KFGS-1-120-D9-23 | 1 | 1.4 | 12 | 4 | |
KFGS-1-120-D9-27 | 1 | 1.4 | 12 | 4 |
KFGS 120Ω Uniaxial 5-element (for concentrated stress measurement)

- Pre-attached type: 2 polyester-coated copper wires (10 cm) + the specified lead-wire cable
Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
5 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D19-11 | 2 | 2.5 | 17 | 5 | |
KFGS-2-120-D19-16 | 2 | 2.5 | 17 | 5 | |
KFGS-2-120-D19-23 | 2 | 2.5 | 17 | 5 | |
KFGS-2-120-D19-27 | 2 | 2.5 | 17 | 5 | |
KFGS-1-120-D19-11 | 1 | 1.5 | 12 | 4 | |
KFGS-1-120-D19-16 | 1 | 1.5 | 12 | 4 | |
KFGS-1-120-D19-23 | 1 | 1.5 | 12 | 4 | |
KFGS-1-120-D19-27 | 1 | 1.5 | 12 | 4 |
KFGS 120Ω Biaxial 5-element, stacked rosette (for concentrated stress measurement)

- Pre-attached type: 2 polyester-coated copper wires (10 cm) + the specified lead-wire cable
Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
5 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-1-120-D39-11 | 1 | 12 | 6.4 | ||
KFGS-1-120-D39-16 | 1 | 12 | 6.4 | ||
KFGS-1-120-D39-23 | 1 | 12 | 6.4 | ||
KFGS-1-120-D39-27 | 1 | 12 | 6.4 |
KFGS 60Ω Uniaxial

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-5-60-C1-11 | 5 | 2 | 10 | 3.4 | |
KFGS-5-60-C1-16 | 5 | 2 | 10 | 3.4 | |
KFGS-5-60-C1-23 | 5 | 2 | 10 | 3.4 | |
KFGS-5-60-C1-27 | 5 | 2 | 10 | 3.4 | |
KFGS-2-60-C1-11 | 2 | 2.3 | 7.2 | 3.7 | |
KFGS-2-60-C1-16 | 2 | 2.3 | 7.2 | 3.7 | |
KFGS-2-60-C1-23 | 2 | 2.3 | 7.2 | 3.7 | |
KFGS-2-60-C1-27 | 2 | 2.3 | 7.2 | 3.7 |
KFGS 350Ω Uniaxial

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-5-350-C1-11 | 5 | 2 | 9.4 | 4.2 | |
KFGS-5-350-C1-16 | 5 | 2 | 9.4 | 4.2 | |
KFGS-5-350-C1-23 | 5 | 2 | 9.4 | 4.2 | |
KFGS-5-350-C1-27 | 5 | 2 | 9.4 | 4.2 | |
KFGS-3-350-C1-11 | 3 | 2 | 7.4 | 4.2 | |
KFGS-3-350-C1-16 | 3 | 2 | 7.4 | 4.2 | |
KFGS-3-350-C1-23 | 3 | 2 | 7.4 | 4.2 | |
KFGS-3-350-C1-27 | 3 | 2 | 7.4 | 4.2 | |
KFGS-2-350-C1-11 | 2 | 2 | 6.3 | 4.2 | |
KFGS-2-350-C1-16 | 2 | 2 | 6.3 | 4.2 | |
KFGS-2-350-C1-23 | 2 | 2 | 6.3 | 4.2 | |
KFGS-2-350-C1-27 | 2 | 2 | 6.3 | 4.2 | |
KFGS-1-350-C1-11 | 1 | 2 | 4.8 | 3.4 | |
KFGS-1-350-C1-16 | 1 | 2 | 4.8 | 3.4 | |
KFGS-1-350-C1-23 | 1 | 2 | 4.8 | 3.4 | |
KFGS-1-350-C1-27 | 1 | 2 | 4.8 | 3.4 |
KFGS 350Ω Biaxial, 0°/90°stacked rosette

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-5-350-D16-11 | 5 | 2 | φ11 | ||
KFGS-5-350-D16-16 | 5 | 2 | φ11 | ||
KFGS-5-350-D16-23 | 5 | 2 | φ11 | ||
KFGS-5-350-D16-27 | 5 | 2 | φ11 | ||
KFGS-3-350-D16-11 | 3 | 2 | φ10 | ||
KFGS-3-350-D16-16 | 3 | 2 | φ10 | ||
KFGS-3-350-D16-23 | 3 | 2 | φ10 | ||
KFGS-3-350-D16-27 | 3 | 2 | φ10 | ||
KFGS-2-350-D16-11 | 2 | 2 | φ10 | ||
KFGS-2-350-D16-16 | 2 | 2 | φ10 | ||
KFGS-2-350-D16-23 | 2 | 2 | φ10 | ||
KFGS-2-350-D16-27 | 2 | 2 | φ10 | ||
KFGS-1-350-D16-11 | 1 | 1.8 | φ8 | ||
KFGS-1-350-D16-16 | 1 | 1.8 | φ8 | ||
KFGS-1-350-D16-23 | 1 | 1.8 | φ8 | ||
KFGS-1-350-D16-27 | 1 | 1.8 | φ8 |
KFGS 350Ω Triaxial, 0°/90°/45°stacked rosette

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-5-350-D17-11 | 5 | 2 | φ11 | ||
KFGS-5-350-D17-16 | 5 | 2 | φ11 | ||
KFGS-5-350-D17-23 | 5 | 2 | φ11 | ||
KFGS-5-350-D17-27 | 5 | 2 | φ11 | ||
KFGS-3-350-D17-11 | 3 | 2 | φ10 | ||
KFGS-3-350-D17-16 | 3 | 2 | φ10 | ||
KFGS-3-350-D17-23 | 3 | 2 | φ10 | ||
KFGS-3-350-D17-27 | 3 | 2 | φ10 | ||
KFGS-2-350-D17-11 | 2 | 2 | φ10 | ||
KFGS-2-350-D17-16 | 2 | 2 | φ10 | ||
KFGS-2-350-D17-23 | 2 | 2 | φ10 | ||
KFGS-2-350-D17-27 | 2 | 2 | φ10 | ||
KFGS-1-350-D17-11 | 1 | 1.8 | φ8 | ||
KFGS-1-350-D17-16 | 1 | 1.8 | φ8 | ||
KFGS-1-350-D17-23 | 1 | 1.8 | φ8 | ||
KFGS-1-350-D17-27 | 1 | 1.8 | φ8 |
KFGS 350Ω Biaxial, 0°/90°, plane arrangement

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-350-D1-11 | 2 | 3 | 10 | 8.5 | |
KFGS-2-350-D1-16 | 2 | 3 | 10 | 8.5 | |
KFGS-2-350-D1-23 | 2 | 3 | 10 | 8.5 | |
KFGS-2-350-D1-27 | 2 | 3 | 10 | 8.5 |
KFGS 350Ω Biaxial, 0°/90°, plane arrangement (for torque)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-350-D2-11 | 2 | 4 | 12 | 6.8 | |
KFGS-2-350-D2-16 | 2 | 4 | 12 | 6.8 | |
KFGS-2-350-D2-23 | 2 | 4 | 12 | 6.8 | |
KFGS-2-350-D2-27 | 2 | 4 | 12 | 6.8 |
KFGS 350Ω Biaxial, 0°/90°, plane arrangement (for torque)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-350-D31-11 | 2 | 3 | 10.5 | 6.5 | |
KFGS-2-350-D31-16 | 2 | 3 | 10.5 | 6.5 | |
KFGS-2-350-D31-23 | 2 | 3 | 10.5 | 6.5 | |
KFGS-2-350-D31-27 | 2 | 3 | 10.5 | 6.5 |
KFGS 500Ω Uniaxial (for making transducers)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-5-500-C1-11 | 5 | 3.5 | 11 | 4.9 | |
KFGS-5-500-C1-16 | 5 | 3.5 | 11 | 4.9 | |
KFGS-5-500-C1-23 | 5 | 3.5 | 11 | 4.9 | |
KFGS-5-500-C1-27 | 5 | 3.5 | 11 | 4.9 | |
KFGS-2-500-C1-11 | 2 | 2.6 | 7.5 | 4.4 | |
KFGS-2-500-C1-16 | 2 | 2.6 | 7.5 | 4.4 | |
KFGS-2-500-C1-23 | 2 | 2.6 | 7.5 | 4.4 | |
KFGS-2-500-C1-27 | 2 | 2.6 | 7.5 | 4.4 |
KFGS 1000Ω Uniaxial (for making transducers)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-5-1K-C1-11 | 5 | 3.5 | 11 | 4.9 | |
KFGS-5-1K-C1-16 | 5 | 3.5 | 11 | 4.9 | |
KFGS-5-1K-C1-23 | 5 | 3.5 | 11 | 4.9 | |
KFGS-5-1K-C1-27 | 5 | 3.5 | 11 | 4.9 | |
KFGS-2-1K-C1-11 | 2 | 3 | 7.2 | 4.5 | |
KFGS-2-1K-C1-16 | 2 | 3 | 7.2 | 4.5 | |
KFGS-2-1K-C1-23 | 2 | 3 | 7.2 | 4.5 | |
KFGS-2-1K-C1-27 | 2 | 3 | 7.2 | 4.5 |
KFGS 120Ω Uniaxial, with Gage Terminal

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-C1-11 T-F7 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-2-120-C1-16 T-F7 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-2-120-C1-23 T-F7 | 2 | 1.2 | 6.3 | 2.8 | |
KFGS-1-120-C1-11 T-F7 | 1 | 1.1 | 4.8 | 2.4 | |
KFGS-1-120-C1-16 T-F7 | 1 | 1.1 | 4.8 | 2.4 | |
KFGS-1-120-C1-23 T-F7 | 1 | 1.1 | 4.8 | 2.4 |
KFGS 120Ω Biaxial, 0°/90° stacked rosette, with Gage Terminal

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D16-11 T-F7 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D16-16 T-F7 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D16-23 T-F7 | 2 | 1.2 | φ8 | ||
KFGS-1-120-D16-11 T-F7 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D16-16 T-F7 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D16-23 T-F7 | 1 | 1.1 | φ5 |
KFGS 120Ω Triaxial, 0°/90°/45°stacked rosette, with Gage Terminal

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-2-120-D17-11 T-F7 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D17-16 T-F7 | 2 | 1.2 | φ8 | ||
KFGS-2-120-D17-23 T-F7 | 2 | 1.2 | φ8 | ||
KFGS-1-120-D17-11 T-F7 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D17-16 T-F7 | 1 | 1.1 | φ5 | ||
KFGS-1-120-D17-23 T-F7 | 1 | 1.1 | φ5 |
KFGS 120Ω Triaxial, 0°/135°/90° (for boring method)

Corresponds to the Material Base color
Linear expansion coefficient based on the base color to distinguish
Lumber(5) Common steel (11) Stainless steel(16) Aluminum(23) Magnesium alloy(27)
10 gages/pkg
Model | Corresponds to the Material Base color | Dimensions (mm) | |||
---|---|---|---|---|---|
Gage(Grid) | Base | ||||
Length | Width | Length | Width | ||
KFGS-3-120-D28-11 | 3 | 2 | φ19.8 | ||
KFGS-3-120-D28-16 | 3 | 2 | φ19.8 | ||
KFGS-3-120-D28-23 | 3 | 2 | φ19.8 | ||
KFGS-3-120-D28-27 | 3 | 2 | φ19.8 | ||
KFGS-1.5-120-D28-11 | 1.5 | 1.3 | φ12 | ||
KFGS-1.5-120-D28-16 | 1.5 | 1.3 | φ12 | ||
KFGS-1.5-120-D28-23 | 1.5 | 1.3 | φ12 | ||
KFGS-1.5-120-D28-27 | 1.5 | 1.3 | φ12 |
Remarks
[Notes on pre-attached lead-wire cables]
∙ Standard color of the 2-wire cable pre-attached to uniaxial gages is red (R).
If desired, a white, green, yellow or black cable can be pre-attached.
∙ Standard stripe of the 3-wire cable pre-attached to uniaxial gages is a red stripe.
If desired, allows a blue or yellow stripe to be pre-attached.
∙ In the case of a biaxial gage and triaxial gage, 2-wire cables are color-coded with red, white and green stripes for 0°, 90° and 45°, respectively and 3-wire cables, with red, yellow and blue stripes for 0°, 90° and 45°, respectively.
The letter code is S in common.
∙ Some products will be sold together with non-RoHS compliant products.
If you have a request for RoHS compliant products, please contact us.