KFP Series
Foil Strain Gages for Plastics

  • RoHS

KFP

Summary

The KFP series foil strain gages provide an applicable linear expansion coefficient of 65 x 10 –6 /ºC, which makes them suitable for strain measurement of plastics such as acrylic resin.

Click here for the [Strain Gages with Pre-attached Lead Cables]

Major Properties

Materials Resistive element CuNi alloy foil
Materials Base Polyimide
Operating temperature in combination with major adhesives after curing (°C) CC-33A: -20 to 80ºC
CC-36: -20 to 80ºC
CC-35: -20 to 80ºC
EP-34B: -20 to 80ºC
Operating temperature in combination with major leadwire cables (°C) Polyester-coated copper wire: -196 to 80ºC
Vinyl-coated flat cable (L-6, L-7): -10 to 80ºC
Self-temperature-compensation (°C) 10 to 80ºC
Applicable linear expansion coefficients (×10-6/℃) 65
Strain limits at normal temp. (approx. %) 3.0
Fatigue lives at normal temp. (times) 1x106 (±1500μm/m)

Relative images

kfp

Contents

When ordering, suffix the lead-wire cable code to the model number with a space in between.

E.g.
For the gage with 3 polyester-coated copper wires 10 cm long pre-attached
→ KFP-5-120-C1-65 N10C3

If no lead-wire cable code is suffixed, the gage is delivered with gage leads only.
(Silver-covered copper wires 25 mm long)

For details, please refer to the [Strain Gages with Pre-attached Lead Cables]

Products table

All display

KFP 120Ω Uniaxial

KFP
    • RoHS

10 gages/pkg

Model Dimensions (mm)
Gage(Grid) Base
Length Width Length Width
KFP-5-120-C1-65 5 2.5 13 5.2
KFP-2-120-C1-65 2 2 10 4.7

KFP 350Ω Uniaxial

KFP
    • RoHS

10 gages/pkg

Model Dimensions (mm)
Gage(Grid) Base
Length Width Length Width
KFP-5-350-C1-65 5 2.6 13 5.2
KFP-2-350-C1-65 2 2.4 10 5.2

Page Top

Remarks

When bonding the KFP gage to difficult-to-bond material such as polyethylene with CC-33A, use the Surface Treatment Agent S-9B in combination.

Download

Catalogs