Encapsulated strain gages are hermetically sealed. They consist of a sensing part and a cable to transmit output signals from the sensing part.
Enable static/dynamic strain measurement at up to 750ºC.
To minimize thermally-induced apparent strain, the half bridge is configured with active and dummy gages.
The short gage length of 5 mm enables installation to a limited space.
|Materials Resistive element||Heat-resistant special alloy|
|Materials Base||Heat-resistant metal|
|Operating temperature in combination with major adhesives after curing (°C)||(Spot welding) 25 to 750ºC|
|Operating temperature in combination with major leadwire cables (°C)||MI Cable: 25 to 750ºC|
|Self-temperature-compensation (°C)||25 to 750ºC|
|Applicable linear expansion coefficients (×10-6/℃)||11, 13, 16|
|Strain limits at normal temp. (approx. %)||-|
|Fatigue lives at normal temp. (times)||-|
To Ensure Safe Usage
The specifications on this page are the reference values. Actual values may vary depending on operating conditions including temperatures.