Firmware for CTRS-100 series Ver.01.08 (02/25/2021)

Upgraded program for the CTRS-100 series firmware

Ver.01.08 (02/25/2021)

  • Fixed the following bugs.
    After you turned OFF and ON the power by any of the following methods, the measured value varied.
    1. Executed the balance adjustment, then turned OFF the power.
      Mode: Strain (2 V)
      Measurement range: 50000 μm/m
      30000 μm/m or more
      *Note that the “Range (Select)” is Optional.
    2. Turned OFF the power without executed the balance adjustment.
      Mode: Remain unchanged
      Measurement range: Changed
  • When you used the pause function during acquisition and checked the recorded file by using the DAS-200A, the “Start time” and “End time” on the [REC/PAUSE Information] page on the [File Information] window were not correct.

Implementation Note

* If the power is cut during update, serious damage is likely to occur.

The file may not be extracted correctly depending on the decompression program. If this is the case, try extracting the file with another decompression software package and installing the software.

  1. The copyright to the software provided in this service (“software”) is owned by Kyowa Electronic Instruments Co., Ltd. or individuals listed as copyright holders.
  2. Unauthorized duplicating, copying, reprinting and changing of the software, in whole or in part, is prohibited by law.
  3. The software may be changed for the purpose of improvement without notice.
  4. Kyowa Electronic Instruments is not liable for any result of saving (downloading) and operating the software.
  5. This service is provided for the customers who use our products applicable to the service.
  6. Before installing the product, please read the agreement below. By installing the product, you are consenting to be bound by and become a party to this agreement. If you do not agree to all of the terms of this agreement, do not install the product and delete the product and its duplicates from your computer memory or hard disk.

Client License Agreement

The customer and Kyowa Electronic Instruments Co., Ltd. (“company”) agree the following concerning the use of the software package (“software”), copyright to which is owned by the company:

Article 1. (License Agreement)

The company grants the customer a license to use the software on a single computer.
The company prohibits the customer from diverting, transferring, selling or leasing the software for any purpose.

Article 2. (Disclaimer of Warranty)

The company makes no warranty as to the quality and performance of the software (*). The company may change the software for improvement without notice. Under no circumstances shall the company be liable for the result of using the software by the customer (*).

Including but not limited to shareware, freeware, sample programs, and updates.

Agree and download5.1 MB