Firmware for UCAM-60C M14 Ver.01.09 (03/30/2022)
Users of UCAM-60C can download the embedded software on this web page.
- Fixed the following bug. When you selected any of the following unit No., enabled the calibration coefficient, selected “1: Print” and measured data by using the “STA” command, the UCAM-60C hung. (This bug did not occur when you selected “0: Not print” or when you measured data by pressing the START/STOP key on the unit.)
Unit No. which caused this trouble
|Unit No.||Unit before the software update||Unit after the software update|
- Click the [Download] icon on the bottom of this page, and save the zip file into your PC, please.
- Select the saved zip file then right click your mouse button, after that select the item of “Extract all files”, please.
The file may not be extracted correctly depending on the decompression program. If this is the case, try extracting the file with another decompression software package and installing the software.
- The copyright to the software provided in this service (“software”) is owned by Kyowa Electronic Instruments Co., Ltd. or individuals listed as copyright holders.
- Unauthorized duplicating, copying, reprinting and changing of the software, in whole or in part, is prohibited by law.
- The software may be changed for the purpose of improvement without notice.
- Kyowa Electronic Instruments is not liable for any result of saving (downloading) and operating the software.
- This service is provided for the customers who use our products applicable to the service.
- Before installing the product, please read the agreement below. By installing the product, you are consenting to be bound by and become a party to this agreement. If you do not agree to all of the terms of this agreement, do not install the product and delete the product and its duplicates from your computer memory or hard disk.
Client License Agreement
The customer and Kyowa Electronic Instruments Co., Ltd. (“company”) agree the following concerning the use of the software package (“software”), copyright to which is owned by the company:
Article 1. (License Agreement)
The company grants the customer a license to use the software on a single computer.
The company prohibits the customer from diverting, transferring, selling or leasing the software for any purpose.
Article 2. (Disclaimer of Warranty)
The company makes no warranty as to the quality and performance of the software (*). The company may change the software for improvement without notice. Under no circumstances shall the company be liable for the result of using the software by the customer (*).
- Including but not limited to shareware, freeware, sample programs, and updates.