Control Sample Program for UCAM-60A/65A Ver.01.00

Users of UCAM-60/64A can download the control sample program on this web page.

This sample program controls UCAM-60A via RS-232C using Visual Basic 6.0, Visual Basic, NET 2002 or Excel 2000.To run the program, a development environment corresponding to each sample software is required.

Computer The development environment (Visual Basic 6.0, Visual Basic, NET2002 or Excel 2000) for the sample software should operate properly.
UCAM-60A Set the communication condition of RS-232C on UCAM menus [6: System management] - [2: Interface] - [2: RS-232C Settings] to match the software settings.
■Baud rate: 38400

Before downloading

This service is provided for the customers who bought UCAM-60A/65A for free. It is therefore the user's responsibility to run this program.Please make sure to read the readme.txt file after downloading.

Installation instructions

  1. Click the button below to download excel.exe.
  2. Double click the downloaded file (excel.exe) for self-extraction in a convenient location on the computer.
  3. Read the readme.txt file in the extracted folder carefully before using the sample program.

Implementation Note

The file may not be extracted correctly depending on the decompression program. If this is the case, try extracting the file with another decompression software package and installing the software.

  1. The copyright to the software provided in this service (“software”) is owned by Kyowa Electronic Instruments Co., Ltd. or individuals listed as copyright holders.
  2. Unauthorized duplicating, copying, reprinting and changing of the software, in whole or in part, is prohibited by law.
  3. The software may be changed for the purpose of improvement without notice.
  4. Kyowa Electronic Instruments is not liable for any result of saving (downloading) and operating the software.
  5. This service is provided for the customers who use our products applicable to the service.
  6. Before installing the product, please read the agreement below. By installing the product, you are consenting to be bound by and become a party to this agreement. If you do not agree to all of the terms of this agreement, do not install the product and delete the product and its duplicates from your computer memory or hard disk.

Client License Agreement

The customer and Kyowa Electronic Instruments Co., Ltd. (“company”) agree the following concerning the use of the software package (“software”), copyright to which is owned by the company:

Article 1. (License Agreement)

The company grants the customer a license to use the software on a single computer.
The company prohibits the customer from diverting, transferring, selling or leasing the software for any purpose.

Article 2. (Disclaimer of Warranty)

The company makes no warranty as to the quality and performance of the software (*). The company may change the software for improvement without notice. Under no circumstances shall the company be liable for the result of using the software by the customer (*).

Including but not limited to shareware, freeware, sample programs, and updates.

Agree and download98KB