Transducer's Bridge Circuit and Cable Connection

*For TEDS compatible products, the + of the TEDS IC is connected to F and COM is connected to G.
For remote-sensing compatible products, the A is connected to the F and C is connected to G.
The shield wire is not connected to the case of the transducers. (Excluding some transducers)
Resistances between conductors or plug pins (In case of a 120Ω or 350Ω transducers)
Connector plug pins | Input (A-C) |
Output (B-D) |
A-B | A-D | B-C | C-D | |
---|---|---|---|---|---|---|---|
Conductors | RD-BK | WT-GR | RD-WT | RD-GR | WT-BK | BK-GR | |
Bridge resistance (R) | 350Ω | 350Ω | 350Ω | 262.5Ω | 262.5Ω | 262.5Ω | 262.5Ω |
120Ω | 120Ω | 120Ω | 90Ω | 90Ω | 90Ω | 90Ω |